> I made two discoveries.
>
> First the sound problem is intermittant.  Sometimes when I power the
> machine off and back on it works fine, other times its very soft.
> Sometimes it will cut out from normal to low volume in the middle of
> the test.
>
> Second, the diagnostic is not always the same each time I cycle the
> power.  Most of the time its exactly as I desribed it.  But sometimes
> when the machine is turned on before running a diagnostic, both LEDs
> light up and it displays a 0, which I think indicates MPU lockup.  One
> time both LEDs came on after running the diagnostic and it displayed
> an 8, which I think still means its the 5101.  Then one other time I
> let it sit on for awhile and the 9 was displayed with the bottom LED
> on, but after awhile, the display changed to a 6.  Occasionally when
> running the diagnostic just garbage comes up on the display.