This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--
Dear Steffen Ullrich,

This is a computer-generated report for Net-SIP-0.47
on perl 5.8.8 patch 34376, created by CPAN-Reporter-1.1702.

Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.

Sections of this report:

* Tester comments
* Program output
* Prerequisites
* Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

none provided

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

make[3]: Entering directory `/home/sand/.cpan/build/Net-SIP-0.47-TiwsPe'
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pO09p_I/perl-5.8.8@34376/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_load.........................ok
t/02_listen_and_invite............# call created
# got ringing
# call established
# call cleaned up
ok
t/03_forward_stateless............ok
t/04_call_with_rtp................# UAS on 127.0.0.1:46010
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 100/100 packets
ok
t/05_call_with_stateless_proxy....# UAS on 127.0.0.1:46013
# UAC on 127.0.0.1:46012
# PROXY on 127.0.0.1:46014 127.0.0.1:46015
# proxy >> OK
# ready
# <<
# uas >> OK
# ready
# <<
# uac >> OK
# ready
# O> udp:127.0.0.1:46014 REQ(INVITE) SDP: audio=127.0.0.1:8732/2
# <<
# proxy >> I< 127.0.0.1:46012 REQ(INVITE) SDP: audio=127.0.0.1:8732/2
# O> udp:127.0.0.1:46013 REQ(INVITE) SDP: audio=127.0.0.1:8732/2
# <<
# uas >> I< 127.0.0.1:46015 REQ(INVITE) SDP: audio=127.0.0.1:8732/2
# <<
# uas >> O> 127.0.0.1:46015 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:46015;branch=z9hG4bK7b74439b07b0d75e6db630e492a87f7d30aa5b627ec78883ac...
# Record-route: <sip:127.0.0.1:46015;lr>
# Record-route: <sip:127.0.0.1:46014;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:46012;branch=z9hG4bK464f1485c1dea96e081aed6cf68425fd30aa5b627ec78883acec105994f8209f...
# Call-id: 5c0e81dcf275a1b52cde435e9f189c4f
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=979143b7d38c64fd2687a3d2b0201fe6
# Content-type: application/sdp
# Content-length: 119
# Max-forwards: 69
# Contact: sip:r5f01484105007750035217001b001a000c030e0300532f7761287c62@127.0.0.1:46015
# To: you.uas@example.com;tag=dd48ef4e311c6f9631280af225ee8e64
#
# v=0
# o=anonymous 1221870969 1221870969 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 8732 RTP/AVP 0
# O> 127.0.0.1:46015 RSP(INVITE,200) SDP: audio=127.0.0.1:7966/2
# <<
# uac >> I< 127.0.0.1:46014 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:46014 RSP(INVITE,200) SDP: audio=127.0.0.1:7966/2
# <<
# uac >> O> 127.0.0.1:46014 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# O> udp:127.0.0.1:46014 REQ(BYE) NO SDP
# I< 127.0.0.1:46014 RSP(BYE,200) NO SDP
# END
# <<
# uas >> I< 127.0.0.1:46015 REQ(ACK) NO SDP
# call established
# I< 127.0.0.1:46015 REQ(BYE) NO SDP
# O> 127.0.0.1:46015 RSP(BYE,200) NO SDP
# call cleaned up
# received 100/100 packets
# RTP ok
# END
# <<
# proxy >> OK
# ready
# <<
# uas >> OK
# ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:46014 REQ(INVITE) SDP: audio=127.0.0.1:4474/2
# <<
# proxy >> I< 127.0.0.1:46012 REQ(INVITE) SDP: audio=127.0.0.1:4474/2
# O> udp:127.0.0.1:46013 REQ(INVITE) SDP: audio=127.0.0.1:4548/2
# <<
# uas >> I< 127.0.0.1:46015 REQ(INVITE) SDP: audio=127.0.0.1:4548/2
# <<
# uas >> O> 127.0.0.1:46015 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:46015;branch=z9hG4bK7b74439b07b0d75e6db630e492a87f7da6ce72551e32864a2c...
# Record-route: <sip:127.0.0.1:46015;lr>
# Record-route: <sip:127.0.0.1:46014;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:46012;branch=z9hG4bK464f1485c1dea96e081aed6cf68425fda6ce72551e32864a2c48a19e3c8d4d64...
# Call-id: 69cb64894f574955834ed6ab2ce2793c
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=0a639648edc96e81bcbad11de9ac9bcd
# Content-type: application/sdp
# Content-length: 119
# Max-forwards: 69
# Contact: sip:r5f01484105007750035217001b001a000c030e0300532f7761287c62@127.0.0.1:46015
# To: you.uas@example.com;tag=e0e991bf391629c61cc372d55615ecb1
#
# v=0
# o=anonymous 1221870971 1221870971 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 4548 RTP/AVP 0
# O> 127.0.0.1:46015 RSP(INVITE,200) SDP: audio=127.0.0.1:2320/2
# <<
# uac >> I< 127.0.0.1:46014 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:46014 RSP(INVITE,200) SDP: audio=127.0.0.1:2030/2
# <<
# uac >> O> 127.0.0.1:46014 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# O> udp:127.0.0.1:46014 REQ(BYE) NO SDP
# I< 127.0.0.1:46014 RSP(BYE,200) NO SDP
# END
# <<
# uas >> I< 127.0.0.1:46015 REQ(ACK) NO SDP
# call established
# I< 127.0.0.1:46015 REQ(BYE) NO SDP
# O> 127.0.0.1:46015 RSP(BYE,200) NO SDP
# call cleaned up
# received 100/100 packets
# RTP ok
# END
# <<
# nathelper >> OK
# <<
# proxy >> OK
# ready
# <<
# uas >> OK
# ready
# <<
# uac >> OK
# ready
# O> udp:127.0.0.1:46014 REQ(INVITE) SDP: audio=127.0.0.1:10470/2
# <<
# proxy >> I< 127.0.0.1:46012 REQ(INVITE) SDP: audio=127.0.0.1:10470/2
# <<
# proxy >> O> udp:127.0.0.1:46013 REQ(INVITE) SDP: audio=127.0.0.1:11618/2
# <<
# uas >> I< 127.0.0.1:46015 REQ(INVITE) SDP: audio=127.0.0.1:11618/2
# O> 127.0.0.1:46015 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:46015;branch=z9hG4bK7b74439b07b0d75e6db630e492a87f7d0ee3e27f7d7d66a87f...
# Record-route: <sip:127.0.0.1:46015;lr>
# Record-route: <sip:127.0.0.1:46014;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:46012;branch=z9hG4bK464f1485c1dea96e081aed6cf68425fd0ee3e27f7d7d66a87ff06b36b916c819...
# Call-id: 33aa5c8405bef868ecb08b289f4abbe4
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=db64660e1c4da73d90c7a24bd4354cd3
# Content-type: application/sdp
# Content-length: 120
# Max-forwards: 69
# Contact: sip:r5f01484105007750035217001b001a000c030e0300532f7761287c62@127.0.0.1:46015
# To: you.uas@example.com;tag=6d0968e05f41f8f7af37606cd349d303
#
# v=0
# o=anonymous 1221870973 1221870973 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 11618 RTP/AVP 0
# O> 127.0.0.1:46015 RSP(INVITE,200) SDP: audio=127.0.0.1:2222/2
# <<
# uac >> I< 127.0.0.1:46014 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:46014 RSP(INVITE,200) SDP: audio=127.0.0.1:8038/2
# <<
# uac >> O> 127.0.0.1:46014 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# O> udp:127.0.0.1:46014 REQ(BYE) NO SDP
# I< 127.0.0.1:46014 RSP(BYE,200) NO SDP
# END
# <<
# uas >> I< 127.0.0.1:46015 REQ(ACK) NO SDP
# call established
# I< 127.0.0.1:46015 REQ(BYE) NO SDP
# O> 127.0.0.1:46015 RSP(BYE,200) NO SDP
# call cleaned up
# received 100/100 packets
# RTP ok
# END
# <<
ok
t/06_call_with_reinvite...........# uas >> OK
# Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# Got ReInvite
# <<
# uas >> got rtp packet#50
# Starting ReInvite
# Start RTP
# <<
# uas >> RTP#50#
# Got RTP
# Received BYE
# <<
# uac >> got rtp packet#50
# Send BYE
# BYE done
# <<
ok
t/07_call_on_hold.................# uas >> OK
# Listening
# <<
# uac >> OK
# Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# Got ReInvite
# <<
# uas >> got rtp packet#50
# Starting ReInvite
# Start RTP
# <<
# uas >> RTP#50#
# Received BYE after 0 bytes read
# <<
# uac >> got rtp packet#50
# Send BYE
# BYE done
# <<
ok
t/08_register_with_auth...........# registrar >> OK
# Listening
# <<
# uac >> OK
# Started
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# uac >> Registered 007 (REALM.example.com)
# <<
# uac >> Registered noauth ()
# <<
ok
t/09_fdleak.......................uas >> OK
Listening
<<
uac >> OK
allocated 1 sockets (7)
<<
uac >> allocated 3 sockets (7..9)
<<
uac >> allocated 1 sockets (7)
<<
uac >> allocated 0 sockets
<<
ok
t/10_fdleak.......................uas >> OK
Listening
<<
uac >> OK
<<
uac >> allocated 1 sockets (7)
<<
uas >> Established
<<
uac >> Established
<<
uac >> allocated 3 sockets (7..9)
<<
uac >> Send BYE done
allocated 1 sockets (7)
allocated 0 sockets
<<
ok
t/11_invite_timeout...............ok
All tests successful.
Files=11, Tests=152, 30 wallclock secs ( 0.17 usr 0.02 sys + 4.24 cusr 0.59 csys = 5.02 CPU)
Result: PASS
make[3]: Leaving directory `/home/sand/.cpan/build/Net-SIP-0.47-TiwsPe'

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

Module Need Have
-------- ---- ----
Net::DNS 0.56 0.63

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

LANG = en_US.utf8
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT = -I/tmp/CPAN-Reporter-lib-4Pt2 -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 17400
PERL5_CPAN_IS_RUNNING = 17400
SHELL = /usr/bin/zsh
TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

$^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pO09p_I/perl-5.8.8@34376/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005

Perl module toolchain versions installed:

Module Have
------------------- ---------
CPAN 1.92_65
Cwd 3.2701
ExtUtils::CBuilder 0.24
ExtUtils::Command 1.14
ExtUtils::Install 1.50_01
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.54
ExtUtils::ParseXS 2.19
File::Spec 3.2701
Module::Build 0.2808_05
Module::Signature 0.55
Test::Harness 3.14
Test::More 0.81_02
YAML 0.66
YAML::Syck 1.05
version 0.76

--

Summary of my perl5 (revision 5 version 8 subversion 8 patch 34376) configuration:
Platform:
osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-64int
uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pO09p_I/perl-5.8.8@34376 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'