This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--
Dear Steffen Ullrich,

This is a computer-generated report for Net-SIP-0.47
on perl 5.11.0 patch 34378, created by CPAN-Reporter-1.1702.

Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.

Sections of this report:

* Tester comments
* Program output
* Prerequisites
* Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

none provided

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

make[3]: Entering directory `/home/sand/.cpan/build/Net-SIP-0.47-DpCUJB'
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pwnBuAX/perl-5.10.0@34378/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_load.........................ok
t/02_listen_and_invite............# call created
# got ringing
# call established
# call cleaned up
ok
t/03_forward_stateless............ok
t/04_call_with_rtp................# UAS on 127.0.0.1:44629
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 100/100 packets
ok
t/05_call_with_stateless_proxy....# UAS on 127.0.0.1:44631
# UAC on 127.0.0.1:44630
# PROXY on 127.0.0.1:44632 127.0.0.1:44633
# proxy >> OK
# ready
# <<
# uas >> OK
# ready
# <<
# uac >> OK
# <<
# uac >> ready
# <<
# uac >> O> udp:127.0.0.1:44632 REQ(INVITE) SDP: audio=127.0.0.1:2214/2
# <<
# proxy >> I< 127.0.0.1:44630 REQ(INVITE) SDP: audio=127.0.0.1:2214/2
# O> udp:127.0.0.1:44631 REQ(INVITE) SDP: audio=127.0.0.1:2214/2
# <<
# uas >> I< 127.0.0.1:44633 REQ(INVITE) SDP: audio=127.0.0.1:2214/2
# O> 127.0.0.1:44633 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:44633;branch=z9hG4bK618d6b4e27525f47a60b88f5c5290f0e01c1f0dcf0b711244e...
# Record-route: <sip:127.0.0.1:44633;lr>
# Record-route: <sip:127.0.0.1:44632;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:44630;branch=z9hG4bK8607e5c8630ee01d588c22c58f6d785701c1f0dcf0b711244ec7553ff0036952...
# Call-id: 6c00b49390a44b7931de9462180acfe2
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=488511204a46d58c2316b5b00ae340dc
# Content-type: application/sdp
# Content-length: 119
# Max-forwards: 69
# Contact: sip:r0e001d4d505b245500034b561c004a045e50015757042c72637b756a@127.0.0.1:44633
# To: you.uas@example.com;tag=c3811d6b4232a976fc175f14c71a5308
#
# v=0
# o=anonymous 1221710849 1221710849 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 2214 RTP/AVP 0
# O> 127.0.0.1:44633 RSP(INVITE,200) SDP: audio=127.0.0.1:7674/2
# <<
# uac >> I< 127.0.0.1:44632 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:44632 RSP(INVITE,200) SDP: audio=127.0.0.1:7674/2
# <<
# uac >> O> 127.0.0.1:44632 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# O> udp:127.0.0.1:44632 REQ(BYE) NO SDP
# I< 127.0.0.1:44632 RSP(BYE,200) NO SDP
# END
# <<
# uas >> I< 127.0.0.1:44633 REQ(ACK) NO SDP
# call established
# I< 127.0.0.1:44633 REQ(BYE) NO SDP
# O> 127.0.0.1:44633 RSP(BYE,200) NO SDP
# call cleaned up
# received 100/100 packets
# RTP ok
# END
# <<
# proxy >> OK
# ready
# <<
# uas >> OK
# ready
# <<
# uac >> OK
# ready
# <<
# uac >> O> udp:127.0.0.1:44632 REQ(INVITE) SDP: audio=127.0.0.1:2258/2
# <<
# proxy >> I< 127.0.0.1:44630 REQ(INVITE) SDP: audio=127.0.0.1:2258/2
# O> udp:127.0.0.1:44631 REQ(INVITE) SDP: audio=127.0.0.1:9320/2
# <<
# uas >> I< 127.0.0.1:44633 REQ(INVITE) SDP: audio=127.0.0.1:9320/2
# O> 127.0.0.1:44633 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:44633;branch=z9hG4bK618d6b4e27525f47a60b88f5c5290f0e2c1af909a7b2ab3ec5...
# Record-route: <sip:127.0.0.1:44633;lr>
# Record-route: <sip:127.0.0.1:44632;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:44630;branch=z9hG4bK8607e5c8630ee01d588c22c58f6d78572c1af909a7b2ab3ec54e033fc1fa9d5c...
# Call-id: 3c2887c1e78bffbb3e6dbd5aa5e45e3c
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=2d7141bd19dc44f32cd876973283276c
# Content-type: application/sdp
# Content-length: 119
# Max-forwards: 69
# Contact: sip:r0e001d4d505b245500034b561c004a045e50015757042c72637b756a@127.0.0.1:44633
# To: you.uas@example.com;tag=0bbce00aaee22bd0d3e4e68775087834
#
# v=0
# o=anonymous 1221710851 1221710851 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 9320 RTP/AVP 0
# <<
# uac >> I< 127.0.0.1:44632 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:44632 RSP(INVITE,200) SDP: audio=127.0.0.1:9742/2
# <<
# uac >> O> 127.0.0.1:44632 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# O> udp:127.0.0.1:44632 REQ(BYE) NO SDP
# I< 127.0.0.1:44632 RSP(BYE,200) NO SDP
# END
# <<
# uas >> O> 127.0.0.1:44633 RSP(INVITE,200) SDP: audio=127.0.0.1:4732/2
# I< 127.0.0.1:44633 REQ(ACK) NO SDP
# call established
# I< 127.0.0.1:44633 REQ(BYE) NO SDP
# O> 127.0.0.1:44633 RSP(BYE,200) NO SDP
# call cleaned up
# received 100/100 packets
# RTP ok
# END
# <<
# nathelper >> OK
# <<
# proxy >> OK
# ready
# <<
# uas >> OK
# ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:44632 REQ(INVITE) SDP: audio=127.0.0.1:3374/2
# <<
# proxy >> I< 127.0.0.1:44630 REQ(INVITE) SDP: audio=127.0.0.1:3374/2
# <<
# proxy >> O> udp:127.0.0.1:44631 REQ(INVITE) SDP: audio=127.0.0.1:3542/2
# <<
# uas >> I< 127.0.0.1:44633 REQ(INVITE) SDP: audio=127.0.0.1:3542/2
# <<
# uas >> O> 127.0.0.1:44633 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:44633;branch=z9hG4bK618d6b4e27525f47a60b88f5c5290f0e6ef278016967bd43ac...
# Record-route: <sip:127.0.0.1:44633;lr>
# Record-route: <sip:127.0.0.1:44632;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:44630;branch=z9hG4bK8607e5c8630ee01d588c22c58f6d78576ef278016967bd43ac8fb7955443a5f1...
# Call-id: 41fb7f5dafeb9006d0919a03d7a6a343
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=afb4a7d3a40e6ed4a86960f9488a177c
# Content-type: application/sdp
# Content-length: 119
# Max-forwards: 69
# Contact: sip:r0e001d4d505b245500034b561c004a045e50015757042c72637b756a@127.0.0.1:44633
# To: you.uas@example.com;tag=84cd69b589e1409562e27dd7089c586a
#
# v=0
# o=anonymous 1221710853 1221710853 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 3542 RTP/AVP 0
# O> 127.0.0.1:44633 RSP(INVITE,200) SDP: audio=127.0.0.1:11670/2
# <<
# uac >> I< 127.0.0.1:44632 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:44632 RSP(INVITE,200) SDP: audio=127.0.0.1:8908/2
# <<
# uac >> O> 127.0.0.1:44632 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# O> udp:127.0.0.1:44632 REQ(BYE) NO SDP
# I< 127.0.0.1:44632 RSP(BYE,200) NO SDP
# END
# <<
# uas >> I< 127.0.0.1:44633 REQ(ACK) NO SDP
# call established
# I< 127.0.0.1:44633 REQ(BYE) NO SDP
# O> 127.0.0.1:44633 RSP(BYE,200) NO SDP
# call cleaned up
# received 100/100 packets
# RTP ok
# END
# <<
ok
t/06_call_with_reinvite...........# uas >> OK
# Listening
# <<
# uac >> OK
# Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# Got ReInvite
# <<
# uas >> got rtp packet#50
# Starting ReInvite
# Start RTP
# <<
# uas >> RTP#50#
# Got RTP
# Received BYE
# <<
# uac >> got rtp packet#50
# Send BYE
# BYE done
# <<
ok
t/07_call_on_hold.................# uas >> OK
# Listening
# <<
# uac >> OK
# Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# Got ReInvite
# <<
# uas >> got rtp packet#50
# Starting ReInvite
# Start RTP
# <<
# uas >> RTP#50#
# Received BYE after 0 bytes read
# <<
# uac >> got rtp packet#50
# Send BYE
# BYE done
# <<
ok
t/08_register_with_auth...........# registrar >> OK
# <<
# registrar >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# uac >> Registered 007 (REALM.example.com)
# <<
# uac >> Registered noauth ()
# <<
ok
t/09_fdleak.......................uas >> OK
Listening
<<
uac >> OK
allocated 1 sockets (7)
<<
uac >> allocated 3 sockets (7..9)
<<
uac >> allocated 1 sockets (7)
<<
uac >> allocated 0 sockets
<<
ok
t/10_fdleak.......................uas >> OK
Listening
<<
uac >> OK
allocated 1 sockets (7)
<<
uas >> Established
<<
uac >> Established
<<
uac >> allocated 3 sockets (7..9)
<<
uac >> Send BYE done
allocated 1 sockets (7)
allocated 0 sockets
<<
ok
t/11_invite_timeout...............ok
All tests successful.
Files=11, Tests=152, 28 wallclock secs ( 0.16 usr 0.06 sys + 4.34 cusr 0.64 csys = 5.20 CPU)
Result: PASS
make[3]: Leaving directory `/home/sand/.cpan/build/Net-SIP-0.47-DpCUJB'

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

Module Need Have
-------- ---- ----
Net::DNS 0.56 0.63

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

LANG = en_US.utf8
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB = /home/sand/.cpan/build/parrot-0.7.1-vZDnPq/blib/arch:/home/sand/.cpan/build/parrot...
PERL5OPT = -I/tmp/CPAN-Reporter-lib-GYAM -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 20902
PERL5_CPAN_IS_RUNNING = 20902
SHELL = /usr/bin/zsh
TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

$^X = /home/src/perl/repoperls/installed-perls/perl/pwnBuAX/perl-5.10.0@34378/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005

Perl module toolchain versions installed:

Module Have
------------------- ---------
CPAN 1.92_64
Cwd 3.2701
ExtUtils::CBuilder 0.24
ExtUtils::Command 1.14
ExtUtils::Install 1.50_01
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.54
ExtUtils::ParseXS 2.19_01
File::Spec 3.2701
Module::Build 0.2808_02
Module::Signature 0.55
Test::Harness 3.14
Test::More 0.80
YAML 0.66
YAML::Syck 1.05
version 0.76

--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 34378) configuration:
Platform:
osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-64int
uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pwnBuAX/perl-5.10.0@34378 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'