This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--

Dear Ingy dot Net,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.

Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Sep 19 09:06:21 2008] Manifying blib/man3/Class::Std::Utils.3

[MSG] [Fri Sep 19 09:06:21 2008] Sending test report for 'Class-Std-Utils-v0.0.3'
[MSG] [Fri Sep 19 09:06:21 2008] Ok, not sending test report
[MSG] [Fri Sep 19 09:06:22 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/R/RO/ROODE/CHECKSUMS'
[MSG] [Fri Sep 19 09:06:30 2008] Checksum matches for 'Readonly-1.03.tar.gz'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/benchmark.pl'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/Changes'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/Makefile.PL'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/MANIFEST'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/META.yml'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/README'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/Readonly.pm'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/array.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/deepa.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/deeph.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/deeps.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/docs.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/export.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/hash.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/readonly.t'
[MSG] [Fri Sep 19 09:06:30 2008] Extracted 'Readonly-1.03/t/reassign.t'
[MSG] [Fri Sep 19 09:06:31 2008] Extracted 'Readonly-1.03/t/scalar.t'
[MSG] [Fri Sep 19 09:06:31 2008] Extracted 'Readonly-1.03/t/tie.t'
[MSG] [Fri Sep 19 09:06:31 2008] Extracted 'Readonly' to '/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03'
[MSG] [Fri Sep 19 09:06:32 2008] Writing Makefile for Readonly

[MSG] [Fri Sep 19 09:06:32 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Sep 19 09:06:32 2008] Checking for previous PASS result for "Readonly-1.03"
[MSG] [Fri Sep 19 09:06:32 2008] Found previous PASS result for "Readonly-1.03" skipping tests.
[MSG] [Fri Sep 19 09:06:33 2008] Manifying blib/man3/Readonly.3

[MSG] [Fri Sep 19 09:06:33 2008] Sending test report for 'Readonly-1.03'
[MSG] [Fri Sep 19 09:06:33 2008] Ok, not sending test report
[MSG] [Fri Sep 19 09:06:33 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/I/IN/INGY/only-0.28.tar.gz'
[MSG] [Fri Sep 19 09:06:40 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/I/IN/INGY/CHECKSUMS'
[MSG] [Fri Sep 19 09:06:42 2008] Checksum matches for 'only-0.28.tar.gz'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/Changes'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/config.pm.template'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/Base.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/Can.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/Fetch.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/Makefile.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/Metadata.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/PERSONAL/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/PERSONAL/only.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install/Win32.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/inc/Module/Install.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/lib/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/lib/only/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/lib/only/config.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/lib/only/install.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/lib/only.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/Makefile.PL'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/MANIFEST'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/META.yml'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/README'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/00config.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/01install.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/02basic.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/03range.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/04clobber.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/05site.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/06require.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/07inc.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/08use.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/09alternate.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/10install_version.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/11fail_msg.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/12set_versionlib.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/13ooapi.t'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/onlyTemplate.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only-0.28/t/onlyTest.pm'
[MSG] [Fri Sep 19 09:06:43 2008] Extracted 'only' to '/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28'
[MSG] [Fri Sep 19 09:06:46 2008]
"only.pm" has special functionality that allows you to install multiple
versions of any Perl module. In order to do this, it installs the
modules in a separate directory than the rest of your modules.

You need to decide which directory the modules will be installed in.
This value will be stored in only::config so that only.pm will know
where to look in order to load special versions of a module.

The suggested place to install special versions of Perl modules is:

/Volumes/Media/smoke/dev/perl-5.8.x/lib/version/5.8.8

Do you want to use the "suggested" directory (y/n)? [y] y
Checking if your kit is complete...
Looks good
Writing Makefile for only

[MSG] [Fri Sep 19 09:06:46 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Sep 19 09:06:46 2008] Checking for previous PASS result for "only-0.28"
[MSG] [Fri Sep 19 09:06:50 2008] cp lib/only/config.pm blib/lib/only/config.pm
cp lib/only.pm blib/lib/only.pm
cp lib/only/install.pm blib/lib/only/install.pm
Manifying blib/man3/only.3
Manifying blib/man3/only::install.3

[ERROR] [Fri Sep 19 09:07:01 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/dev/perl-5.8.x/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00config.............ok
t/01install............ok
t/02basic..............Loaded _Foo::Bar, but version (v1.00) did not satisfy the requirement:

use only _Foo::Bar => '0.50';

at t/02basic.t line 6
BEGIN failed--compilation aborted at t/02basic.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
t/03range..............Loaded _Foo::Bar, but version (v1.00) did not satisfy the requirement:

use only _Foo::Bar => '0.50-0.59 !0.50';

at t/03range.t line 6
BEGIN failed--compilation aborted at t/03range.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests
t/04clobber............Loaded _Foo::Bar, but version (v1.00) did not satisfy the requirement:

use only _Foo::Bar => '0.55';

at t/04clobber.t line 6
BEGIN failed--compilation aborted at t/04clobber.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
t/05site...............Use of uninitialized value in pattern match (m//) at t/05site.t line 7.
Use of uninitialized value in pattern match (m//) at t/05site.t line 10.
ok
t/06require............Loaded _Foo::Bar, but version (v1.00) did not satisfy the requirement:

use only _Foo::Bar => '0.60';

at t/06require.t line 6
BEGIN failed--compilation aborted at t/06require.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
t/07inc................Loaded _Foo::Bar, but version (v1.00) did not satisfy the requirement:

use only _Foo::Bar => '0.60';

at t/07inc.t line 6
BEGIN failed--compilation aborted at t/07inc.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/5 subtests
t/08use................ok
t/09alternate..........
# Failed test at t/09alternate.t line 25.
# got: 'Can't locate desired version of _Boom in @INC:
# - only:_Boom:/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/t...
# - t/site
# - t/lib
# - t
# - inc
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/inc
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/lib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/arch
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/li...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/ar...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/lib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/arch
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8/darwin-thread-multi-64int-2level
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8/darwin-thread-multi-64int...
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8
# - .
# at (eval 23) line 2
# BEGIN failed--compilation aborted at (eval 23) line 2.
# '
# expected: ''

# Failed test at t/09alternate.t line 26.
# got: undef
# expected: '0.77'

# Failed test at t/09alternate.t line 27.
# got: undef
# expected: 'Bada-Boom'
# Looks like you failed 3 tests of 4.
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/4 subtests
t/10install_version....
# Failed test at t/10install_version.t line 14.
# got: 'Can't locate desired version of _Boom in @INC:
# - only:_Boom:/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/t...
# - t/site
# - t/lib
# - t
# - inc
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/inc
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/lib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/arch
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/li...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/ar...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/lib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/arch
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8/darwin-thread-multi-64int-2level
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8/darwin-thread-multi-64int...
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8
# - .
# at (eval 23) line 2
# BEGIN failed--compilation aborted at (eval 23) line 2.
# '
# expected: ''

# Failed test at t/10install_version.t line 15.
# got: undef
# expected: '0.77'

# Failed test at t/10install_version.t line 16.
# got: undef
# expected: 'Bada-Boom'
# Looks like you failed 3 tests of 4.
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/4 subtests
t/11fail_msg...........ok
t/12set_versionlib.....
# Failed test at t/12set_versionlib.t line 15.
# got: 'Can't locate desired version of _Boom in @INC:
# - only:_Boom:/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/t...
# - t/site
# - t/lib
# - t
# - inc
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/inc
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/lib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/arch
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/li...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/ar...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/...
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/lib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/arch
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8/darwin-thread-multi-64int-2level
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8/darwin-thread-multi-64int...
# - /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8
# - .
# at (eval 15) line 2
# BEGIN failed--compilation aborted at (eval 15) line 2.
# '
# expected: ''

# Failed test at t/12set_versionlib.t line 16.
# got: undef
# expected: '0.77'

# Failed test at t/12set_versionlib.t line 17.
# got: undef
# expected: 'Bada-Boom'
# Looks like you failed 3 tests of 3.
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/3 subtests
t/13ooapi..............
# Failed test at t/13ooapi.t line 20.
# got: '1.00'
# expected: '0.50'

# Failed test at t/13ooapi.t line 22.
# 't/site/_Foo/Bar.pm'
# doesn't match '(?-xism:version)'

# Failed test at t/13ooapi.t line 23.
Use of uninitialized value in pattern match (m//) at t/13ooapi.t line 24.

# Failed test at t/13ooapi.t line 24.
# undef
# doesn't match '(?-xism:version)'
Can't locate _Boom.pm in @INC (@INC contains: only:_Boom:/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/t... only:_Foo::Bar:/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.... t/site t/lib t inc /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/inc /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/lib /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib/arch /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/li... /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/ar... /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/... /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/... /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-Utils-v0.0.3/... /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/lib /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib/arch /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Readonly-1.03/blib /Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/only-0.28/blib /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8/darwin-thread-multi-64int-2level /Volumes/Media/smoke/dev/perl-5.8.x/lib/5.8.8 /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8/darwin-thread-multi-64int... /Volumes/Media/smoke/dev/perl-5.8.x/lib/site_perl/5.8.8 .) at t/13ooapi.t line 28.
# Looks like you planned 11 tests but only ran 6.
# Looks like you failed 4 tests of 6 run.
# Looks like your test died just after 6.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/11 subtests

Test Summary Report
-------------------
t/02basic (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/03range (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 4 tests but ran 0.
t/04clobber (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/06require (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/07inc (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 5 tests but ran 0.
t/09alternate (Wstat: 768 Tests: 4 Failed: 3)
Failed tests: 2-4
Non-zero exit status: 3
t/10install_version (Wstat: 768 Tests: 4 Failed: 3)
Failed tests: 2-4
Non-zero exit status: 3
t/12set_versionlib (Wstat: 768 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
t/13ooapi (Wstat: 65280 Tests: 6 Failed: 4)
Failed tests: 2, 4-6
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 6.
Files=14, Tests=30, 10 wallclock secs ( 0.35 usr 0.26 sys + 5.94 cusr 2.69 csys = 9.24 CPU)
Result: FAIL
Failed 9/14 test programs. 13/30 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Fri Sep 19 09:07:01 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

_Boom

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:

WriteMakefile(
AUTHOR => 'Ingy dot Net (INGY@cpan.org)',
... # other information
PREREQ_PM => {
'_Boom' => '0', # or a minimum working version
}
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************

Additional comments:

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.06.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

AUTOMATED_TESTING = 1
PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/Volumes/Media/smoke/dev/perl-5.8.x/.cpanplus/5.8.8/build/Class-Std-0.0.9/blib/lib...
PERL5_CPANPLUS_IS_RUNNING = 5054
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL5_CPANPLUS_VERBOSE = 1
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

Perl: $^X = /Volumes/Media/smoke/dev/perl-5.8.x/bin/perl
UID: $< = 502
EUID: $> = 502
GID: $( = 502 502
EGID: $) = 502 502

-------------------------------

--

Summary of my perl5 (revision 5 version 8 subversion 8 patch 34327) configuration:
Platform:
osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level
uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
config_args='-de -Dprefix=/Volumes/Media/smoke/dev/perl-5.8.x -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O3',
cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lc
perllibs=-ldl -lm -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '