This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--
Dear Ben Evans,

This is a computer-generated report for LJ-Schedule-0.6
on perl 5.6.2, created by CPAN-Reporter-1.15.

Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

* Tester comments
* Program output
* Prerequisites
* Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

none provided

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /usr/local/bin/perl5.6.2 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.........
# Failed test 'use LJ::Schedule;'
# at t/00-load.t line 6.
# Tried to use 'LJ::Schedule'.
# Error: Can't locate Data/Ical.pm in @INC (@INC contains: /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/arch /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl . /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl) at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule/Vcal.pm line 8.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule.pm line 118.
# BEGIN failed--compilation aborted at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule.pm line 118.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.

# Failed test 'use LJ::Schedule::Post;'
# at t/00-load.t line 8.
# Tried to use 'LJ::Schedule::Post'.
# Error: Can't locate LJ/Simple.pm in @INC (@INC contains: /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/arch /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl . /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl) at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule/Post/Simple.pm line 8.
# BEGIN failed--compilation aborted at t/00-load.t line 8.
# Compilation failed in require at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule/Post.pm line 78.
# BEGIN failed--compilation aborted at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule/Post.pm line 78.
# Compilation failed in require at (eval 6) line 2.
# BEGIN failed--compilation aborted at (eval 6) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 12.
# Testing LJ::Schedule , Perl 5.006002, /usr/local/bin/perl5.6.2
# Looks like you failed 2 tests of 4.
dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1, 3
Failed 2/4 tests, 50.00%% okay
t/01schedule......
# Failed test 'use LJ::Schedule;'
# at t/01schedule.t line 6.
# Tried to use 'LJ::Schedule'.
# Error: Can't locate Data/Ical.pm in @INC (@INC contains: /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/arch /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl . /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl) at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule/Vcal.pm line 8.
# BEGIN failed--compilation aborted at t/01schedule.t line 6.
# Compilation failed in require at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule.pm line 118.
# BEGIN failed--compilation aborted at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule.pm line 118.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Undefined subroutine &LJ::Schedule::get_config called at t/01schedule.t line 9.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-7
Failed 7/7 tests, 0.00%% okay
t/02vcal..........
# Failed test 'use LJ::Schedule::Vcal;'
# at t/02vcal.t line 8.
# Tried to use 'LJ::Schedule::Vcal'.
# Error: Can't locate Data/Ical.pm in @INC (@INC contains: /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/arch /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl . /usr/perl5.6.2/lib/5.6.2/i386-freebsd /usr/perl5.6.2/lib/5.6.2 /usr/perl5.6.2/lib/site_perl/5.6.2/i386-freebsd /usr/perl5.6.2/lib/site_perl/5.6.2 /usr/perl5.6.2/lib/site_perl) at /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO/blib/lib/LJ/Schedule/Vcal.pm line 8.
# BEGIN failed--compilation aborted at t/02vcal.t line 8.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "LJ::Schedule::Vcal" (perhaps you forgot to load "LJ::Schedule::Vcal"?) at t/02vcal.t line 15.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
Failed 2/2 tests, 0.00%% okay
t/boilerplate.....ok
t/pod-coverage....skipped
all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............ok
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/00-load.t 2 512 4 2 1 3
t/01schedule.t 255 65280 7 13 1-7
t/02vcal.t 255 65280 2 3 1-2
1 test skipped.
Failed 3/6 test scripts. 11/23 subtests failed.
Files=6, Tests=23, 1 wallclock secs ( 0.13 cusr + 0.03 csys = 0.16 CPU)
Failed 3/6 test programs. 11/23 subtests failed.
*** Error code 35

Stop in /var/tmp/CPAN-build/LJ-Schedule-0.6-yWvsMO.

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

Module Need Have
---------- ---- ----
Test::More 0 0.72

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

PATH = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin:/usr/perl5.8.0/bin:/usr/bin:/bin:/usr/local/sbin...
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 52261
PERL5_CPAN_IS_RUNNING = 52261
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 3773,52261
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_HTML_DISPLAY_CLASS = HTML::Display::Mozilla
SHELL = /usr/local/bin/zsh
TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

$^X = /usr/local/bin/perl5.6.2
$UID/$EUID = 1023 / 1023
$GID = 1023 1023 1023
$EGID = 1023 1023 1023

Perl module toolchain versions installed:

Module Have
------------------- ---------
CPAN 1.92_61
Cwd 3.25
ExtUtils::CBuilder n/a
ExtUtils::Command 1.13
ExtUtils::Install 1.41
ExtUtils::MakeMaker 6.36
ExtUtils::Manifest 1.51
ExtUtils::ParseXS n/a
File::Spec 3.25
Module::Build 0.2808_01
Module::Signature n/a
Test::Harness 2.64
Test::More 0.72
YAML 0.39
YAML::Syck 0.99
version n/a

--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
Platform:
osname=freebsd, osvers=6.1-release, archname=i386-freebsd
uname='freebsd biokovo.herceg.de 6.1-release freebsd 6.1-release #0: sun may 7 04:32:43 utc 2006 root@opus.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args='-Dprefix=/usr/perl5.6.2 -D cc=ccache cc -Dgccansipedantic -Duse64bit -de -D hintfile=myfreebsd'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='ccache cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -I/usr/local/include',
optimize='-O2 -mtune=athlon64 -pipe',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, usemymalloc=y, prototype=define
Linker and Libraries:
ld='ccache cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lc -lcrypt -lutil
perllibs=-lm -lc -lcrypt -lutil
libc=, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fpic', lddlflags='-shared -L/usr/local/lib'