This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--

Dear Roland Giersig,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.

Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Sep 7 13:05:49 2008] Manifying blib/man3/Devel::StackTrace.3

[MSG] [Sun Sep 7 13:05:50 2008] Sending test report for 'Devel-StackTrace-1.1902'
[MSG] [Sun Sep 7 13:05:50 2008] Ok, not sending test report
[MSG] [Sun Sep 7 13:05:55 2008] Manifying blib/man3/Exception::Class.3

[MSG] [Sun Sep 7 13:05:57 2008] Sending test report for 'Exception-Class-1.24'
[MSG] [Sun Sep 7 13:05:57 2008] Ok, not sending test report
[MSG] [Sun Sep 7 13:06:01 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/R/RG/RGIERSIG/CHECKSUMS'
[MSG] [Sun Sep 7 13:06:04 2008] Checksum matches for 'IO-Tty-1.07.tar.gz'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/ChangeLog'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/Makefile.PL'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/MANIFEST'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/META.yml'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/Pty.pm'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/README'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/test.pl'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/try'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/Tty.pm'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO-Tty-1.07/Tty.xs'
[MSG] [Sun Sep 7 13:06:07 2008] Extracted 'IO::Pty' to '/home/cpan/pit/rel/perl5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.07'
[MSG] [Sun Sep 7 13:12:39 2008] Now let's see what we can find out about your system
(logfiles of failing tests are available in the conf/ dir)...
Looking for _getpty()...... not found.
Looking for getpt()........ not found.
Looking for grantpt()...... FOUND.
Looking for openpty()...... FOUND.
Looking for ptsname()...... FOUND.
Looking for ptsname_r().... not found.
Looking for sigaction().... FOUND.
Looking for strlcpy()...... FOUND.
Looking for ttyname()...... FOUND.
Looking for unlockpt()..... FOUND.
Looking for libutil.h...... not found.
Looking for pty.h.......... not found.
Looking for sys/pty.h...... not found.
Looking for sys/ptyio.h.... not found.
Looking for sys/stropts.h.. not found.
Looking for termio.h....... not found.
Looking for termios.h...... FOUND.
Looking for util.h......... FOUND.
Checking which symbols compile OK...
(sorry for the tedious check, but some systems have not too clean
header files, to say the least; '+' means OK, '-' means not defined
and '*' has compile problems...)
+B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 +B76800 +B9600 +BRKINT -BS0 -BS1 -BSDLY -CBAUD -CBAUDEXT +CBRK +CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH -CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT -CR0 -CR1 -CR2 -CR3 -CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF +CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB -FF0 -FF1 -FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP -IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS -NL0 -NL1 -NLDLY +NOFLSH +OCRNL -OFDEL -OFILL -OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG -TAB0 -TAB1 -TAB2 -TAB3 -TABDLY -TCDSET -TCFLSH -TCGETA -TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW -TCSBRK -TCSETA -TCSETAF -TCSETAW -TCSETCTTY -TCSETS -TCSETSF -TCSETSW -TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK +TIOCCDTR +TIOCCONS +TIOCEXCL +TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID -TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ +TIOCREMOTE +TIOCSBRK +TIOCSCTTY +TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID -TIOCSSOFTCAR +TIOCSTART +TIOCSTI +TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD +VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH -VT0 -VT1 -VTDLY +VTIME +VWERASE -WRAP -XCASE -XCLUDE -XMT1EN -XTABS

Writing IO::Tty::Constant.pm...
DEFINE = -DHAVE_DEV_PTMX -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT -DHAVE_UTIL_H
Checking if your kit is complete...
Looks good
Writing Makefile for IO::Tty

[MSG] [Sun Sep 7 13:12:40 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Sep 7 13:12:40 2008] Checking for previous PASS result for "IO-Tty-1.07"
[MSG] [Sun Sep 7 13:13:13 2008] cp Tty.pm blib/lib/IO/Tty.pm
cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm
cp Pty.pm blib/lib/IO/Pty.pm
/home/cpan/pit/rel/perl5.8.8/bin/perl /home/cpan/pit/rel/perl5.8.8/lib/5.8.8/ExtUtils/xsubpp -typemap /home/cpan/pit/rel/perl5.8.8/lib/5.8.8/ExtUtils/typemap Tty.xs > Tty.xsc && mv Tty.xsc Tty.c
cc -c -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include -O -DVERSION=\"1.07\" -DXS_VERSION=\"1.07\" -DPIC -fPIC "-I/home/cpan/pit/rel/perl5.8.8/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE" -DHAVE_DEV_PTMX -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT -DHAVE_UTIL_H Tty.c
Running Mkbootstrap for IO::Tty ()
chmod 644 Tty.bs
rm -f blib/arch/auto/IO/Tty/Tty.so
cc --whole-archive -shared -L/usr/pkg/lib Tty.o -o blib/arch/auto/IO/Tty/Tty.so -lutil
chmod 755 blib/arch/auto/IO/Tty/Tty.so
cp Tty.bs blib/arch/auto/IO/Tty/Tty.bs
chmod 644 blib/arch/auto/IO/Tty/Tty.bs
Manifying blib/man3/IO::Tty::Constant.3
Manifying blib/man3/IO::Tty.3
Manifying blib/man3/IO::Pty.3

[ERROR] [Sun Sep 7 13:13:18 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/pit/rel/perl5.8.8/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..4
Configuration: -DHAVE_DEV_PTMX -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT -DHAVE_UTIL_H
Checking for appropriate ioctls: TIOCNOTTY TIOCSCTTY
Checking that returned fd's don't clash with stdin/out/err...
trying openpty()...
trying grantpt()...
trying unlockpt()...
trying ptsname()...
Cannot create a new IO::Tty from fd 5: Bad file descriptor at test.pl line 42
trying openpty()...
trying grantpt()...
trying unlockpt()...
trying ptsname()...
Cannot create a new IO::Tty from fd 7: Bad file descriptor at test.pl line 58
child exit=2304
not ok 1
# Test failed at test.pl line 52.
Checking if child gets pty as controlling terminal...
*** Error code 9

Stop.
make: stopped in /home/cpan/pit/rel/perl5.8.8/.cpanplus/5.8.8/build/IO-Tty-1.07

[MSG] [Sun Sep 7 13:13:18 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************

Additional comments:

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.04.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/rel/perl5.8.8/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib:/home/cpan/pit/rel/perl5...
PERL5_CPANPLUS_IS_RUNNING = 27995
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL5_CPANPLUS_VERBOSE = 1
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

Perl: $^X = /home/cpan/pit/rel/perl5.8.8/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100
EGID: $) = 100 100

-------------------------------

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=netbsd, osvers=4.0, archname=i386-netbsd-thread-multi-64int
uname='netbsd diafol-goch.bingosnet.co.uk 4.0 netbsd 4.0 (generic) #0: sun dec 16 00:20:10 pst 2007 builds@wb34:homebuildsabnetbsd-4-0-releasei386200712160005z-objhomebuildsabnetbsd-4-0-releasesrcsysarchi386compilegeneric i386 '
config_args='-e -Dprefix=/home/cpan/pit/rel/perl5.8.8 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include'
ccversion='', gccversion='4.1.2 20061021 prerelease (NetBSD nb3 20061125)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking: