This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--

Dear DALEAMON,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.

Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Sep 3 15:32:15 2008] icc -c -D_REENTRANT -D_GNU_SOURCE -we147 -no-gcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -no-gcc -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -DVERSION=\"1.607\" -DXS_VERSION=\"1.607\" -fPIC "-I/home/smoke/perl/builds/5.10.0/lib/5.10.0/x86_64-linux-thread-multi/CORE" DBI.c
DBI.xs(2864): warning #589: transfer of control bypasses initialization of:
variable "h_perl" (declared at line 2935)
goto is_DESTROY_wrong_thread;
^

Running Mkbootstrap for DBI ()
chmod 644 DBI.bs
rm -f blib/arch/auto/DBI/DBI.so
icc -shared -no-gcc -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -L/opt/intel/cce/lib -L/usr/local/lib DBI.o -o blib/arch/auto/DBI/DBI.so \
\

chmod 755 blib/arch/auto/DBI/DBI.so
cp DBI.bs blib/arch/auto/DBI/DBI.bs
chmod 644 blib/arch/auto/DBI/DBI.bs
cp dbiprof blib/script/dbiprof
/home/smoke/perl/builds/5.10.0/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/dbiprof
cp dbiproxy blib/script/dbiproxy
/home/smoke/perl/builds/5.10.0/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/dbiproxy
cp dbilogstrip blib/script/dbilogstrip
/home/smoke/perl/builds/5.10.0/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/dbilogstrip

[MSG] [Wed Sep 3 15:32:15 2008] Sending test report for 'DBI-1.607'
[MSG] [Wed Sep 3 15:32:15 2008] Ok, not sending test report
[MSG] [Wed Sep 3 15:32:15 2008] Sending test report for 'Fault-1.01-2'
[MSG] [Wed Sep 3 15:32:15 2008] Ok, not sending test report
[MSG] [Wed Sep 3 15:32:15 2008] cp lib/Document/Directory.pm blib/lib/Document/Directory.pm
cp lib/File/Spec/Dated.pm blib/lib/File/Spec/Dated.pm
cp lib/Document/PageId.pm blib/lib/Document/PageId.pm
cp lib/Document/TocFile.pm blib/lib/Document/TocFile.pm
cp lib/Document/NotesFile.pm blib/lib/Document/NotesFile.pm
cp lib/Document/Toc.pm blib/lib/Document/Toc.pm
cp lib/File/Spec/BaseParse.pm blib/lib/File/Spec/BaseParse.pm
cp lib/Document/PageIterator.pm blib/lib/Document/PageIterator.pm
cp lib/File/Spec/DatedPage.pm blib/lib/File/Spec/DatedPage.pm
cp lib/Document/Members.pm blib/lib/Document/Members.pm
cp lib/Document/LogFile.pm blib/lib/Document/LogFile.pm
cp lib/File/Spec/PublicationPage.pm blib/lib/File/Spec/PublicationPage.pm

[ERROR] [Wed Sep 3 15:32:15 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/smoke/perl/builds/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/load....Can't locate DMA/FSM.pm in @INC (@INC contains: /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Document-0.03-2/blib/lib /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Document-0.03-2/blib/arch /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib/lib /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib/arch /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib/lib /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib/arch /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Document-0.03-2/blib /home/smoke/perl/builds/5.10.0/lib/5.10.0/x86_64-linux-thread-multi /home/smoke/perl/builds/5.10.0/lib/5.10.0/x86_64-linux-thread-multi /home/smoke/perl/builds/5.10.0/lib/5.10.0 /home/smoke/perl/builds/5.10.0/lib/site_per
l/5.10.0/x86_64-linux-thread-multi /home/smoke/perl/builds/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi /home/smoke/perl/builds/5.10.0/lib/site_perl/5.10.0 . /home/smoke/perl/builds/5.10.0/lib/5.10.0/x86_64-linux-thread-multi /home/smoke/perl/builds/5.10.0/lib/5.10.0 /home/smoke/perl/builds/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi /home/smoke/perl/builds/5.10.0/lib/site_perl/5.10.0 .) at /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Document-0.03-2/blib/lib/File/Spec/DatedPage.pm line 13.
BEGIN failed--compilation aborted at /home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Document-0.03-2/blib/lib/File/Spec/DatedPage.pm line 13.
Compilation failed in require at t/load.t line 14.
BEGIN failed--compilation aborted at t/load.t line 14.
dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED test 1
Failed 1/1 tests, 0.00%% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/load.t 2 512 1 1 1
Failed 1/1 test scripts. 1/1 subtests failed.
Files=1, Tests=1, 0 wallclock secs ( 0.00 cusr + 0.00 csys = 0.00 CPU)
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 2

[MSG] [Wed Sep 3 15:32:15 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

DMA::FSM

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:

WriteMakefile(
AUTHOR => 'DALEAMON (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'DMA::FSM' => '0', # or a minimum working version
}
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

Module Name Have Want
Exporter 5.62 0
Fault::Logger 0 0
POSIX 1.13 0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************

Additional comments:

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.02.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

AUTHOR_TESTING = 1
AUTOMATED_TESTING = 1
LANG = C
LC_ALL = C
PATH = /home/smoke/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc...
PERL5LIB = :/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib/lib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib/arch:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib/lib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib/arch:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/DBI-1.607/blib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib/lib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib/arch:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib/lib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib/arch:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Fault-1.01-2/blib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus
/5.10.0/build/Document-0.03-2/blib/lib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Document-0.03-2/blib/arch:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Document-0.03-2/blib
PERL5_CPANPLUS_IS_RUNNING = 19966
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL5_CPANPLUS_VERBOSE = 1
PERL_MM_USE_DEFAULT = 1
PERL_TEST_CRITIC = 1
PERL_TEST_POD = 1
SHELL = /bin/bash
TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

Perl: $^X = /home/smoke/perl/builds/5.10.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100

-------------------------------

--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.24.2-fuuka.profvince.com, archname=x86_64-linux-thread-multi
uname='linux fuuka 2.6.24.2-fuuka.profvince.com #1 smp wed feb 20 21:54:12 cet 2008 x86_64 intel(r) core(tm)2 duo cpu e6750 @ 2.66ghz genuineintel gnulinux '
config_args='-e -Dcf_email=vpit@cpan.org -Dmydomain=fuuka.profvince.com -Dusethreads -Duse64bitall -Dcc=icc -Doptimize=-no-gcc -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -Dcccdlflags=-fPIC -Dldflags=-L/opt/intel/cce/lib -Dman1dir=none -Dman3dir=none -Dprefix=/home/smoke/perl/builds/5.10.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='icc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -we147 -no-gcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-no-gcc -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel',
cppflags='-D_REENTRANT -D_GNU_SOURCE -we147 -no-gcc -I/usr/include/gdbm'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='icc', ldflags ='-L/opt/intel/cce/lib -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lsvml -lguide -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lsvml -lguide -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -no-gcc -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -L/opt/intel/cce/lib -L/usr/local/lib'