This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--

Dear DOMQ,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.

Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Sep 12 20:55:33 2008] Manifying blib/man3/Test::Group.3

[MSG] [Fri Sep 12 20:55:33 2008] Sending test report for 'Test-Group-0.12'
[MSG] [Fri Sep 12 20:55:33 2008] Ok, not sending test report
[MSG] [Fri Sep 12 20:56:42 2008] /home/cpan/perl510/bin/perl Build --makefile_env_macros 1

Checking OpenSSL version number...

Found 0x90704fd. Good.

/home/cpan/perl510/bin/perl -I /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/lib -e BEGIN { $Crypt::OpenSSL::CA::VERSION = '0.18' ; } use Crypt::OpenSSL::CA::Inline::C; use Inline qw(_INSTALL_); use Crypt::OpenSSL::CA; 0.18 blib/arch
Writing Makefile for Crypt::OpenSSL::CA::X509V3_EXT
/home/cpan/perl510/bin/perl /home/cpan/perl510/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/perl510/lib/5.10.0/ExtUtils/typemap X509V3_EXT.xs > X509V3_EXT.xsc && mv X509V3_EXT.xsc X509V3_EXT.c
cc -c -I/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18 -fno-strict-aliasing -pipe -I/usr/pkg/include -g -O2 -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -DPIC -fPIC "-I/home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int/CORE" X509V3_EXT.c
Running Mkbootstrap for Crypt::OpenSSL::CA::X509V3_EXT ()
chmod 644 X509V3_EXT.bs
rm -f blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/X509V3_EXT.so
LD_RUN_PATH="/lib:/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib X509V3_EXT.o -o blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/X509V3_EXT.so -lcrypto -lssl
chmod 755 blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/X509V3_EXT.so
cp X509V3_EXT.bs blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/X509V3_EXT.bs
chmod 644 blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/X509V3_EXT.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/X509V3_EXT.so
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/X509V3_EXT.bs
Writing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509V3_EXT/.packlist
Writing Makefile for Crypt::OpenSSL::CA::CONF
/home/cpan/perl510/bin/perl /home/cpan/perl510/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/perl510/lib/5.10.0/ExtUtils/typemap CONF.xs > CONF.xsc && mv CONF.xsc CONF.c
cc -c -I/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18 -fno-strict-aliasing -pipe -I/usr/pkg/include -g -O2 -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -DPIC -fPIC "-I/home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int/CORE" CONF.c
Running Mkbootstrap for Crypt::OpenSSL::CA::CONF ()
chmod 644 CONF.bs
rm -f blib/arch/auto/Crypt/OpenSSL/CA/CONF/CONF.so
LD_RUN_PATH="/lib:/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib CONF.o -o blib/arch/auto/Crypt/OpenSSL/CA/CONF/CONF.so -lcrypto -lssl
chmod 755 blib/arch/auto/Crypt/OpenSSL/CA/CONF/CONF.so
cp CONF.bs blib/arch/auto/Crypt/OpenSSL/CA/CONF/CONF.bs
chmod 644 blib/arch/auto/Crypt/OpenSSL/CA/CONF/CONF.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/CONF/CONF.so
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/CONF/CONF.bs
Writing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/CONF/.packlist
Writing Makefile for Crypt::OpenSSL::CA::X509_CRL
/home/cpan/perl510/bin/perl /home/cpan/perl510/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/perl510/lib/5.10.0/ExtUtils/typemap X509_CRL.xs > X509_CRL.xsc && mv X509_CRL.xsc X509_CRL.c
cc -c -I/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18 -fno-strict-aliasing -pipe -I/usr/pkg/include -g -O2 -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -DPIC -fPIC "-I/home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int/CORE" X509_CRL.c
Running Mkbootstrap for Crypt::OpenSSL::CA::X509_CRL ()
chmod 644 X509_CRL.bs
rm -f blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/X509_CRL.so
LD_RUN_PATH="/lib:/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib X509_CRL.o -o blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/X509_CRL.so -lcrypto -lssl
chmod 755 blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/X509_CRL.so
cp X509_CRL.bs blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/X509_CRL.bs
chmod 644 blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/X509_CRL.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/X509_CRL.so
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/X509_CRL.bs
Writing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509_CRL/.packlist
Writing Makefile for Crypt::OpenSSL::CA::X509_NAME
/home/cpan/perl510/bin/perl /home/cpan/perl510/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/perl510/lib/5.10.0/ExtUtils/typemap X509_NAME.xs > X509_NAME.xsc && mv X509_NAME.xsc X509_NAME.c
cc -c -I/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18 -fno-strict-aliasing -pipe -I/usr/pkg/include -g -O2 -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -DPIC -fPIC "-I/home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int/CORE" X509_NAME.c
Running Mkbootstrap for Crypt::OpenSSL::CA::X509_NAME ()
chmod 644 X509_NAME.bs
rm -f blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/X509_NAME.so
LD_RUN_PATH="/lib:/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib X509_NAME.o -o blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/X509_NAME.so -lcrypto -lssl
chmod 755 blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/X509_NAME.so
cp X509_NAME.bs blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/X509_NAME.bs
chmod 644 blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/X509_NAME.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/X509_NAME.so
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/X509_NAME.bs
Writing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509_NAME/.packlist
Writing Makefile for Crypt::OpenSSL::CA::PrivateKey
/home/cpan/perl510/bin/perl /home/cpan/perl510/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/perl510/lib/5.10.0/ExtUtils/typemap PrivateKey.xs > PrivateKey.xsc && mv PrivateKey.xsc PrivateKey.c
cc -c -I/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18 -fno-strict-aliasing -pipe -I/usr/pkg/include -g -O2 -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -DPIC -fPIC "-I/home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int/CORE" PrivateKey.c
Running Mkbootstrap for Crypt::OpenSSL::CA::PrivateKey ()
chmod 644 PrivateKey.bs
rm -f blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/PrivateKey.so
LD_RUN_PATH="/lib:/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib PrivateKey.o -o blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/PrivateKey.so -lcrypto -lssl
chmod 755 blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/PrivateKey.so
cp PrivateKey.bs blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/PrivateKey.bs
chmod 644 blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/PrivateKey.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/PrivateKey.so
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/PrivateKey.bs
Writing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/PrivateKey/.packlist
Writing Makefile for Crypt::OpenSSL::CA::PublicKey
/home/cpan/perl510/bin/perl /home/cpan/perl510/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/perl510/lib/5.10.0/ExtUtils/typemap PublicKey.xs > PublicKey.xsc && mv PublicKey.xsc PublicKey.c
cc -c -I/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18 -fno-strict-aliasing -pipe -I/usr/pkg/include -g -O2 -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -DPIC -fPIC "-I/home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int/CORE" PublicKey.c
Running Mkbootstrap for Crypt::OpenSSL::CA::PublicKey ()
chmod 644 PublicKey.bs
rm -f blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/PublicKey.so
LD_RUN_PATH="/lib:/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib PublicKey.o -o blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/PublicKey.so -lcrypto -lssl
chmod 755 blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/PublicKey.so
cp PublicKey.bs blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/PublicKey.bs
chmod 644 blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/PublicKey.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/PublicKey.so
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/PublicKey.bs
Writing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/PublicKey/.packlist
Writing Makefile for Crypt::OpenSSL::CA::X509
/home/cpan/perl510/bin/perl /home/cpan/perl510/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/perl510/lib/5.10.0/ExtUtils/typemap X509.xs > X509.xsc && mv X509.xsc X509.c
cc -c -I/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18 -fno-strict-aliasing -pipe -I/usr/pkg/include -g -O2 -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -DPIC -fPIC "-I/home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int/CORE" X509.c
Running Mkbootstrap for Crypt::OpenSSL::CA::X509 ()
chmod 644 X509.bs
rm -f blib/arch/auto/Crypt/OpenSSL/CA/X509/X509.so
LD_RUN_PATH="/lib:/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib X509.o -o blib/arch/auto/Crypt/OpenSSL/CA/X509/X509.so -lcrypto -lssl
chmod 755 blib/arch/auto/Crypt/OpenSSL/CA/X509/X509.so
cp X509.bs blib/arch/auto/Crypt/OpenSSL/CA/X509/X509.bs
chmod 644 blib/arch/auto/Crypt/OpenSSL/CA/X509/X509.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509/X509.so
Installing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509/X509.bs
Writing /home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch/auto/Crypt/OpenSSL/CA/X509/.packlist
Manifying blib/lib/Crypt/OpenSSL/CA/Resources.pod -> blib/libdoc/Crypt::OpenSSL::CA::Resources.3
Manifying blib/lib/Crypt/OpenSSL/CA/AlphabetSoup.pod -> blib/libdoc/Crypt::OpenSSL::CA::AlphabetSoup.3
Manifying blib/lib/Crypt/OpenSSL/CA.pm -> blib/libdoc/Crypt::OpenSSL::CA.3
Manifying blib/lib/Crypt/OpenSSL/CA/Inline/C.pm -> blib/libdoc/Crypt::OpenSSL::CA::Inline::C.3

[ERROR] [Fri Sep 12 20:57:31 2008] MAKE TEST failed: Illegal seek /home/cpan/perl510/bin/perl Build --makefile_env_macros 1 test
t/10-unknown-method..............ok
t/example-make-cert-chain........ok
t/example-make-crls..............
# Failed test 'make-cert-chain.pl runs without errors'
# at t/example-make-crls.t line 22.
# got: '65280'
# expected: '0'
# -----BEGIN X509 CRL-----
# MIICKzCCAZQCAQEwDQYJKoZIhvcNAQEFBQAwRTELMAkGA1UEBhMCQVUxEzARBgNV
# BAgTClNvbWUtU3RhdGUxITAfBgNVBAoTGEludGVybmV0IFdpZGdpdHMgUHR5IEx0
# ZBcNMDcwMTAxMDAwMDAwWhgPMjA1NzAxMDEwMDAwMDBaMIGaMBICARAXDTA3MDIx
# MjEwMDAwMFowIAIBERcNMDcwMjEyMTAwMTAwWjAMMAoGA1UdFQQDCgEAMDoCARIX
# DTA3MDIxMjEwMDIwMFowJjAKBgNVHRUEAwoBATAYBgNVHRgEERgPMjAwNzAyMTAw
# MDAwMDBaMCYCAUIXDTA3MDIxMjA5MDEwMFowEjAQBgNVHRcECQYHKoZIzjgCBKB8
# MHowHwYDVR0jBBgwFoAU7vqhl+/cXLxRPKRuc8dhXKgLleUwIQYDVR0UAQH/BBcC
# FQDerb7v3q2+796tvu/erb7v3q2+7zA0BgNVHS4ELTArMCmgJ6AlhiNodHRwOi8v
# d3d3LmV4YW1wbGUuY29tL2RlbHRhY3JsLmNybDANBgkqhkiG9w0BAQUFAAOBgQAr
# tQ1o7DClmING+7CiNxtReO8QBA0MOUOoJJxTotbJsRnfkxgwmWWYl+kLq6OJWH50
# Bw+wWlXsLgWOu5M1Fq4GR+JeTNAToSzTGdNAwpDuv68xNfj+6b8qCEMuqTIcjLzG
# MHjxJapFU349ZekbLv4pLlzCJrwF9+1W1Ddx67u9Bw==
# -----END X509 CRL-----
# Crypt::OpenSSL::CA: error: X509V3_EXT_i2d failed
# error:22088081:X509 V3 routines:X509V3_EXT_i2d:unknown extension

# Failed test 'make-crls.pl produced 2 CRLs on standard output'
# at t/example-make-crls.t line 28.
# got: '1'
# expected: '2'
No point in testing anything else... at t/example-make-crls.t line 28.
# Looks like you failed 2 tests of 2.
# Looks like your test died just after 2.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
Failed 2/2 tests, 0.00%% okay
lib/Crypt/OpenSSL/CA.............# Failed (TODO) test in lib/Crypt/OpenSSL/CA.pm at line 3097.
# Failed (TODO) test in lib/Crypt/OpenSSL/CA.pm at line 3102.
ok
13/39 skipped: various reasons
lib/Crypt/OpenSSL/CA/Inline/C....ok
2/9 skipped: various reasons
t/lib/Crypt/OpenSSL/CA/Test......ok
1/14 skipped: various reasons
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/example-make-crls.t 255 65280 2 2 1-2
16 subtests skipped.
Failed 1/6 test scripts. 2/83 subtests failed.
Files=6, Tests=83, 46 wallclock secs (39.81 cusr + 6.25 csys = 46.06 CPU)
Failed 1/6 test programs. 2/83 subtests failed.
gmake: *** [test] Error 255

[MSG] [Fri Sep 12 20:57:31 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

Module Name Have Want
Convert::ASN1 0.21 0.2
Devel::Leak 0.03 0
Devel::Mallinfo 3 0
Fatal 1.05 0
File::Find 1.12 0
File::Path 2.04 0
File::Slurp 9999.13 0
File::Spec 3.2501 0
File::Spec::Functions 3.2501 0
File::Spec::Unix 3.2501 0
File::Temp 0.18 0
FindBin 1.49 0
IO::File 1.14 0
IPC::Run 0.80 0
Inline 0.44 0.4
Inline::C 0.44 0
MIME::Base64 3.07_01 0
Module::Build 0.2808_01 0
Module::Build::Compat 0.2808_01 0
Net::SSLeay 1.35 1.25
POSIX 1.13 0
Test::Builder 0.72 0
Test::Group 0.12 0
Test::More 0.72 0
XSLoader 0.08 0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************

Additional comments:

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.02.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/perl510/.cpanplus/5.10.0/build/Convert-ASN1-0.21/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Convert-ASN1-0.21/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Convert-ASN1-0.21/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Convert-ASN1-0.21/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Convert-ASN1-0.21/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Convert-ASN1-0.21/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Leak-0.03/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Leak-0.03/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Leak-0.03/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Leak-0.03/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Leak-0.03/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Leak-0.03/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Mallinfo-3/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Mallinfo-3/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Mallinfo-3/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Mallinfo-3/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Mallinfo-3/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Devel-Mallinfo-3/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/File-Slurp-9999.13/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/File-Slurp-9999.13/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/File-Slurp-9999.13/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/File-Slurp-9999.13/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/File-Slurp-9999.13/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/File-Slurp-9999.13/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/IPC-Run-0.80/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/IPC-Run-0.80/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/IPC-Run-0.80/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/IPC-Run-0.80/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/IPC-Run-0.80/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/IPC-Run-0.80/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Parse-RecDescent-1.94/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Parse-RecDescent-1.94/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Parse-RecDescent-1.94/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Parse-RecDescent-1.94/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Parse-RecDescent-1.94/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Parse-RecDescent-1.94/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Inline-0.44/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Inline-0.44/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Inline-0.44/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Inline-0.44/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Inline-0.44/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Inline-0.44/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Net-SSLeay-1.35/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Net-SSLeay-1.35/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Net-SSLeay-1.35/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Net-SSLeay-1.35/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Net-SSLeay-1.35/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Net-SSLeay-1.35/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Test-Group-0.12/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Test-Group-0.12/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Test-Group-0.12/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Test-Group-0.12/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Test-Group-0.12/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Test-Group-0.12/blib:/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Crypt-OpenSSL-CA-0.18/blib
PERL5_CPANPLUS_IS_RUNNING = 11594
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL5_CPANPLUS_VERBOSE = 1
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

Perl: $^X = /home/cpan/perl510/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100

-------------------------------

--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd... i386 '
config_args='-e -Dprefix=/home/cpan/perl510/ -Dusethreads -Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '