This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/

--

Dear MICHEL,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.

Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Sep 19 23:25:41 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MI/MICHEL/Business-KontoCheck-2.93.tar....'
[MSG] [Fri Sep 19 23:25:45 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MI/MICHEL/CHECKSUMS'
[MSG] [Fri Sep 19 23:25:46 2008] Checksum matches for 'Business-KontoCheck-2.93.tar.gz'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/KontoCheck.xs'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/00liesmich.txt'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/test2.pl'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/0_history.txt'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/ppport.h'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/lgpl.txt'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/konto_check.c'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/META.yml'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/konto_check-at.c'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/Changes'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/README'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/konto_check.h'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/lib/'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/lib/Business/'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/lib/Business/KontoCheck.pm'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/README.zlib'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/zlib.tar.gz'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/blz.lut'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/testkonten-at.txt'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/konto_check-at.h'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/blz-at.lut'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/new_blz.t'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/old.t'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/ipi.t'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/iban.t'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/new_pz.t'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/lut2.t'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/t/austrian.t'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/MANIFEST'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/testkonten.txt'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/Makefile.PL'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/inpar.dat.gz'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business-KontoCheck-2.93/makefile.zlib'
[MSG] [Fri Sep 19 23:25:46 2008] Extracted 'Business::KontoCheck' to '/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Business-KontoCheck-2.93'
[MSG] [Fri Sep 19 23:25:46 2008] Loading YACSmoke database "/home/smoke/perl/builds/5.10.0/etc/.cpanplus/cpansmoke.dat"
[MSG] [Fri Sep 19 23:25:47 2008] Check zlib development package... looks good
use dynamic version of zlib
Checking if your kit is complete...
Looks good
Writing Makefile for Business::KontoCheck
Warning: -L. changed to -L/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Business-KontoCheck-2.93/.

[MSG] [Fri Sep 19 23:25:47 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Sep 19 23:25:47 2008] Checking for previous PASS result for "Business-KontoCheck-2.93"
[MSG] [Fri Sep 19 23:25:58 2008] cp test2.pl blib/lib/Business/test2.pl
cp lib/Business/KontoCheck.pm blib/lib/Business/KontoCheck.pm
/home/smoke/perl/builds/5.10.0/bin/perl /home/smoke/perl/builds/5.10.0/lib/5.10.0/ExtUtils/xsubpp -typemap /home/smoke/perl/builds/5.10.0/lib/5.10.0/ExtUtils/typemap KontoCheck.xs > KontoCheck.xsc && mv KontoCheck.xsc KontoCheck.c
icc -c -I. -D_REENTRANT -D_GNU_SOURCE -we147 -mp -no-gcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -DVERSION=\"2.93\" -DXS_VERSION=\"2.93\" -fPIC "-I/home/smoke/perl/builds/5.10.0/lib/5.10.0/x86_64-linux-thread-multi/CORE" -Wno-uninitialized -DINCLUDE_KONTO_CHECK_AT=1 -DINCLUDE_KONTO_CHECK_DE=1 KontoCheck.c
icc -c -I. -D_REENTRANT -D_GNU_SOURCE -we147 -mp -no-gcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -DVERSION=\"2.93\" -DXS_VERSION=\"2.93\" -fPIC "-I/home/smoke/perl/builds/5.10.0/lib/5.10.0/x86_64-linux-thread-multi/CORE" -Wno-uninitialized -DINCLUDE_KONTO_CHECK_AT=1 -DINCLUDE_KONTO_CHECK_DE=1 konto_check-at.c
konto_check-at.c(588): (col. 4) remark: LOOP WAS VECTORIZED.
konto_check-at.c(693): (col. 4) remark: LOOP WAS VECTORIZED.
konto_check-at.c(946): (col. 7) remark: LOOP WAS VECTORIZED.
icc -c -I. -D_REENTRANT -D_GNU_SOURCE -we147 -mp -no-gcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -DVERSION=\"2.93\" -DXS_VERSION=\"2.93\" -fPIC "-I/home/smoke/perl/builds/5.10.0/lib/5.10.0/x86_64-linux-thread-multi/CORE" -Wno-uninitialized -DINCLUDE_KONTO_CHECK_AT=1 -DINCLUDE_KONTO_CHECK_DE=1 konto_check.c
konto_check.lx(904): (col. 22) remark: PARTIAL LOOP WAS VECTORIZED.
konto_check.lx(904): (col. 22) remark: LOOP WAS VECTORIZED.
konto_check.lx(904): (col. 22) remark: FUSED LOOP WAS VECTORIZED.
konto_check.lx(904): (col. 22) remark: LOOP WAS VECTORIZED.
konto_check.lx(1350): (col. 13) remark: LOOP WAS VECTORIZED.
konto_check.lx(1362): (col. 13) remark: LOOP WAS VECTORIZED.
konto_check.lx(1400): (col. 13) remark: LOOP WAS VECTORIZED.
konto_check.lx(1386): (col. 13) remark: LOOP WAS VECTORIZED.
konto_check.lx(1323): (col. 13) remark: LOOP WAS VECTORIZED.
konto_check.lx(3617): (col. 4) remark: LOOP WAS VECTORIZED.
konto_check.lx(12241): (col. 7) remark: LOOP WAS VECTORIZED.
konto_check.lx(3789): (col. 4) remark: LOOP WAS VECTORIZED.
konto_check.lx(3800): (col. 4) remark: FUSED LOOP WAS VECTORIZED.
konto_check.lx(3812): (col. 4) remark: LOOP WAS VECTORIZED.
konto_check.lx(2691): (col. 17) remark: LOOP WAS AUTO-PARALLELIZED.
konto_check.lx(2853): (col. 16) remark: LOOP WAS AUTO-PARALLELIZED.
konto_check.lx(2691): (col. 17) remark: LOOP WAS VECTORIZED.
konto_check.lx(2691): (col. 17) remark: LOOP WAS VECTORIZED.
konto_check.lx(2691): (col. 17) remark: LOOP WAS VECTORIZED.
Running Mkbootstrap for Business::KontoCheck ()
chmod 644 KontoCheck.bs
rm -f blib/arch/auto/Business/KontoCheck/KontoCheck.so
LD_RUN_PATH="/lib" icc -shared -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -L/opt/intel/cce/lib -L/usr/local/lib KontoCheck.o konto_check-at.o konto_check.o -o blib/arch/auto/Business/KontoCheck/KontoCheck.so \
-L/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Business-KontoCheck-2.93 -lz \

chmod 755 blib/arch/auto/Business/KontoCheck/KontoCheck.so
cp KontoCheck.bs blib/arch/auto/Business/KontoCheck/KontoCheck.bs
chmod 644 blib/arch/auto/Business/KontoCheck/KontoCheck.bs

[ERROR] [Fri Sep 19 23:26:00 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/smoke/perl/builds/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/austrian....ok
t/iban........
# Failed test 'lut_init(): -38 => es wurden nicht alle Blocks geladen (ok: 0, nok: 1)'
# at t/iban.t line 13.
# Looks like you planned 57 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 56/57 subtests
t/ipi.........ok
t/lut2........
# Failed test 'init: -38 => es wurden nicht alle Blocks geladen (ok: 0, nok: 1)'
# at t/lut2.t line 12.
# Looks like you planned 22 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 21/22 subtests
t/new_blz.....
# Failed test 'init: -38 => es wurden nicht alle Blocks geladen (ok: 0, nok: 1)'
# at t/new_blz.t line 12.
# Looks like you planned 487 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 486/487 subtests
t/new_pz......ok
t/old.........
# Failed test 'init: -38 => es wurden nicht alle Blocks geladen (ok: 0, nok: 1)'
# at t/old.t line 12.
# Looks like you planned 1033 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1032/1033 subtests

Test Summary Report
-------------------
t/iban (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
Parse errors: Bad plan. You planned 57 tests but ran 2.
t/lut2 (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
Parse errors: Bad plan. You planned 22 tests but ran 2.
t/new_blz (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
Parse errors: Bad plan. You planned 487 tests but ran 2.
t/old (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
Parse errors: Bad plan. You planned 1033 tests but ran 2.
Files=7, Tests=8061, 2 wallclock secs ( 0.65 usr 0.02 sys + 0.78 cusr 0.04 csys = 1.49 CPU)
Result: FAIL
Failed 4/7 test programs. 4/8061 subtests failed.
make: *** [test_dynamic] Error 1

[MSG] [Fri Sep 19 23:26:00 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************

Additional comments:

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.06.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

AUTHOR_TESTING = 1
AUTOMATED_TESTING = 1
LANG = C
LC_ALL = C
PATH = /usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.1:/opt/intel/cce/10...
PERL5LIB = :/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Business-KontoCheck-2.93/blib/lib:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Business-KontoCheck-2.93/blib/arch:/home/smoke/perl/builds/5.10.0/etc/.cpanplus/5.10.0/build/Business-KontoCheck-2.93/blib
PERL5_CPANPLUS_IS_RUNNING = 5562
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL5_CPANPLUS_VERBOSE = 1
PERL_MM_USE_DEFAULT = 1
PERL_TEST_CRITIC = 1
PERL_TEST_POD = 1
SHELL = /bin/bash
TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

Perl: $^X = /home/smoke/perl/builds/5.10.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100

-------------------------------

--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.26.3-fuuka.profvince.com, archname=x86_64-linux-thread-multi
uname='linux fuuka 2.6.26.3-fuuka.profvince.com #1 smp tue sep 2 23:24:24 cest 2008 x86_64 intel(r) core(tm)2 duo cpu e6750 @ 2.66ghz genuineintel gnulinux '
config_args='-des -Dcf_email=vpit@cpan.org -Dmydomain=fuuka.profvince.com -Dusethreads -Duse64bitall -Dmorebits -Dcc=icc -Doptimize=-xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -Dcccdlflags=-fPIC -Dldflags=-L/opt/intel/cce/lib -Dman1dir=none -Dman3dir=none -Dprefix=/home/smoke/perl/builds/5.10.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='icc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -we147 -mp -no-gcc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-xT -O3 -inline-level=2 -fomit-frame-pointer -parallel',
cppflags='-D_REENTRANT -D_GNU_SOURCE -we147 -mp -no-gcc -I/usr/include/gdbm'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='icc', ldflags ='-L/opt/intel/cce/lib -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.8.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.8'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -xT -O3 -inline-level=2 -fomit-frame-pointer -parallel -L/opt/intel/cce/lib -L/usr/local/lib'