Author:
Date: Jul 21, 2008 05:55
Thanks, will look and see. Chris.
>>> On 6/28/2008 at 1:10 PM, in message
ix.netcom.com>, Craig
Johnsonix.netcom.com> wrote:
> More than likely it's using 80 or 443 and not using the
> proxy. If you
> know the destination IP address (and hope it's not a
> supernetted
> network), you can set up a single stateful exception to
> allow the
> traffic to that destination. (As an experiment, you can
> add
> www-http-st from private to public and see if that works.
> If so, add
> the destination address as a restriction and test again.
> If http
> doesn't work at first, try www-https-st to allow port 443
|