receiving code 39 " cannot load the device driver for this hardward driver
may be corrupted or missing etc"
I tried to install an sb audigy sound card the device is seen in device
manager but with exclamation mark....and error 39. When i loaded the drivers
windows told me they were not digitally signed I said install anyway...but
dxdiag and the properties pages in device manager tell me they are digitally
signed...another strange bit of info is that system restore has lost all its
points up till the installation of this card....when I try update driver
etc..windows tells me the existing driver is ok and up to date...any help
gratefully received.
.p.s I installeda card that I know works on another pc but got the same
response.....the card is there and works the drivers are there and...

Hello all together,

i have a big problem. Perhaps everybody can help me.

On my old disk 60GB i have 5 partitions:

1. partition Windows 2000 prof.
2. partition Windows XP prof <=== production, here
is the problem!
3. partition Windows 2000 srv
4. partiion fpr programms
5. partition ...

Now, i have change the old disk to a bigger (160GB) disk.

I have copied all Data.

Partition 1 started very well and i can login and work with them.
Partition 3 started very well and i can login and work with them.
Parttion 2 (XP) is still standing with a screen of Windows XP. But not a
login screen is not comming up.

After a long time i found that the file \system32\config\system have
everything to do with my problem.

The new disk is the reason for my problem. That's fact. Why are the Windows
2000 partions working very well and XP not?

My ready-made externals do that , but one that I put in a 3d party enclosure
won't, and keeps spinning even when the 'puter's powered down. Is there any
utility that would monitor an expernal HD and spin it down while enactive?
Thanks.

Hello

I have a problem since this morning, because yesterday my computer was
working just fine. After I push the power button the first screen(the
screen where my IDE and SATA devices are listed) took about 1-2 minutes
to appear. I could see the memory specifications (like the header of the
screen), but it took 1-2 minutes to display my HDD and my DVD-ROM. And
then, when it was supposed to start loading Windows, I got the message:
"Disk boot failure. Insert system disk and press enter".

I thought it was my hard disk and I had one brand new, unformatted,
available, so I replaced the HDD with this new one. The error was still
the same, of course, because it had nothing on it, like I said.

I inserted a Win XP cd and I managed to install it on my new HDD. At
every restart I had to wait 1-2 minutes to see the first screen. After
installing was complete I restarted the computer (the CD no longer in,
so it had to boot from HDD) and...the same "disk boot failure" error.

I have 2 IDE ports on my motherboard, so I tried both of them, I tried
with another IDE cable, but nothing seems to work.

Any ideas, please ? I don't have another motherboard to test if that is
the problem.

I did a freash install o widows xp, and when I plugged in my photo printer
I get "This divice has malfuntioned and windows will not reconize it'
I'm using a usb cable, and hve tried a new one and still does the same.
I'm running xp home sp2 1 gig mem, three hard drives, 6800gt nvidia

Last month I had a serious problem with XP which I want to share with
you all

Due to a virus attach everytime when I log on to windows it shows me a
msg box displaying *"Virusscan.vb is not found"* , I just press OK
button & it went fine. As I am using Bitdefender AV I searched the
reports & found a reg entry gets modified by the virus, I deleted the
entry but backed up the registry in d drive prior to making changes.

The next time when I logged on to windows it get stuck up in the
welcome screen displaying *\"LOADING YOUR SETTINGS & THEN SAVING YOUR
SETTINGS\"*, finally I have to reinstall XP on my SATA hdd, does anyone
have a solution & how can I replace my registry with the backed up
registry. Pls help...............

--
bhuwanp

HI,

My computer will not boot in any mode it gets as far as a file named mup.sys
and then reboots. I have a copy of windows xp home which is what is installed
on my notebook it just isint the same version. I have tried to do a repair
but when I do it takes me to the command promt and the only visible
drives/partitions are D:\ and F:\ If I type C:\ that works. I have tried
chkdsk and am told that all is working fine but when I type /p it will not
work. also typing dir will not work either I am told there is an emuration or
something similiar problem. Can anyone help advise me on what I should be
doing please Thankyou

my pc wont see my vx6000 webcam. I see on forums others are having the same
problem. It sees a "usb20" webcam when I connect the unit. I have uninstalled
and reinstalled the latest software, as well as trying older software, but
Windows always sees the cam as a "usb20". Have tried the microsoft email
support, which doesnt work by the way. Anybody got any ideas on this issue?

Active@Undelete - Hard Drive Recovery
Recover lost, deleted or formatted data from hard drives and other
damaged media. Toll-free and low prices.
http://www.healthhuman.com.cn/Hard-Drive.htm

Hi,

I just replaced my hard drives with 2 new Western Digital Caviar SE16
WD3200AAKS 320GB 7200 RPM 16MB Cache SATA 3.0Gb drives from Newegg.
They are installed as a RAID 0 mirror pair using the mobo's nVidia
Chipset RAID controller. During XP install I hit f6, stuff my floppy
with the raid drivers in etc and the install works fine. Then when I
come to boot XP I get a blue screen of death with a STOP 0x0000007B
error (about removing any newly installed hard drives or hard drive
controllers etc).

Whats the most likely cause ? Is it a h/w incompatibility issue ?
Driver issue ? A bad drive ?

I've a ASUS P5N32-SLI SE Deluxe mobo. Prior to these WD3200AAKS
disks, I had a pair of Western Digital Caviar SE16 WD3200KS 320GB
7200 RPM 16MB Cache SATA 3.0Gb disks in raid 0 which worked ok.

Any help would be much appreciated.

Thanks
Dom