Re: Windows Embedded Based Geode PC

Re: Windows Embedded Based Geode PC - Image doesn't work.

POPULAR GROUPS

more...

Re: Windows Embedded Based Geode PC - Image doesn't work.

Group: microsoft.public.windowsxp.embedded · Group Profile
Author: Tobias Philipp
Date: Jun 10, 2007 21:43

Thx, the Boot works.

Now I just must find drivers for 4 Devices which creates in the Target
Designer now Error but, the boot failed while these Drivers are missing.

----------------------------------------------------------------------
Could not find a driver for Hardware Device:
pci\ven_1078&dev_0101&cc_068000&rev_00
(pci\ven_1078&dev_0101&cc_068000&rev_00).

Chip Number: Cx5530
Chip Description: SMI status and ACPI timer
Notes: Kahula chipset for MediaGX CPU, function #1
----------------------------------------------------------------------
Could not find a driver for Hardware Device:
pci\ven_1078&dev_0103&cc_040100&rev_00
(pci\ven_1078&dev_0103&cc_040100&rev_00).

Chip Number: Cx5530
Chip Description: XpressAUDIO
Notes: Kahula chipset for MediaGX CPU, function #3
----------------------------------------------------------------------
Could not find a driver for Hardware Device:
pci\ven_1078&dev_0104&subsys_00011078&rev_00
(pci\ven_1078&dev_0104&subsys_00011078&rev_00).

Chip Number: Cx5530
Chip Description: Video Controller
Notes: Kahula chipset for MediaGX CPU, function #4
----------------------------------------------------------------------
Could not find a driver for Hardware Device: *CRX0002 (*CRX0002).

CRX0002: XpressAUDIO(TM) 16-bit Sound

Hardware ids supported:
PCI\VEN_1078&DEV_0104, *NSC0001, *NSC0003, *CRX0002
----------------------------------------------------------------------

manufacturer: http://www.national.com (national semiconductors)

The XPressAudio is part of "Geode GXLV Processor Series Low Power
Integrated x86 Solutions" and the search on there webpage brings just an
pdf "Geode GXLV Processor Series Low Power Integrated x86 Solutions".

hmmm =(

If someone have an Idea where I can find a Driver I would be very happy.

regards
Tobias Philipp

Thierry J. schrieb:

> Hi Tobias,
>
> I think you have the right tools but you have to follow these steps:
>
> 1/ format the CF using "HP USB Tool" (FAT16 + Create DOS), note that you
> have to point to a folder containing Win98 DOS files (3 files will be copied)
> 2/ copy the rest of win98 DOS files on the CF
> 3/ copy BOOTPREP.EXE on the CF
> 4/ insert the CF on the target and reboot the target
> 5/ on DOS prompt type: BOOTPREP /dC (assuming the CF is C drive)
> 6/ answer "Y" twice (the CF will NEVER boot DOS again unless you reformat !)
> 7/ insert the CF on the Host and copy ALL the content of "Windows embedded
> image" folder to CF root (including ntldr, boot.ini ...)
> 8/ insert CF on the target, reboot the target... XP + FBA should start
>
> NOTE: The success of this procedure depends on CF manufacturer, in some
> cases I have to format FAT32 or lanch BOOTPREP from another drive on the
> target (USB key).
>
> Regards,
> Thierry J.
>
> "Tobias Philipp" wrote:
>

>> Ethan Chen schrieb:

>>> Hi tobias,
>>>
>>> Did you create MBR as a bootable dsik for your CF card? You can use bootprep
>>> to create it.

>>
>> Hi Ethan,
>>
>> If I use Bootprep the result doesn't change.
>>
>> If I format the CF Card with "HP USB Disk Storage Format Tool" I can
>> format the CF Card as Dos Boot Disk with variable disk capacity. Than I
>> can add windows 98 or my Imagefiles for WinCE. The standard Windows
>> Format Tool doesn't accept the CF Card for Format as a Dos Boot Disk.
>>
>> With the XPe Image it doesn't work.
>>
>> If I format the CF Card as Dos Disk and copy the Image files on it, just
>> Dos Mode starts. If I remove the Command.com and the two sys files just
>> the error occours "invalide system files, please remove disk".
>>
>> regards
>> Tobias Philipp
>>

no comments
	diggit!			del.icio.us!			reddit!

RELATED THREADS

Subject	Articles qty	Group
Windows XP and Windows Vista ExpertZone chat tomorrow, June 5th 10am PST	1	microsoft.public.windows.vista.mail ·