I have an iyonix and USB2 - got the machine second hand. I seem to be
only have 1 usb 2 port (at the rear) and all the others usb 1. When
pluging a device into the back the USBinfo shows it running at USB2
connection, vs on USB 1 when using the front connectors

Is this strange or how other iyonix machines are working?

Peter

In article <4faebd8d43pm_noble@yahoo.co.nz>, P M Noble
yahoo.co.nz> wrote:

All sockets are potentially USB2. If the device plugged in is USB2
capable then it will run as USB2, otherwise it will run as USB1.

If using USBInfo I suggest viewing the topology window as this is
clearer. It shows two USB1 root hubs and a virtual USB2 hub. All USB2
devices should appear under the virtual hub.

If it's still not clear then post the results of '*USBDevices'. Any
devices that have the same bus number as the EHCI root hub are running as
USB2.

HTH,
Ian