Author: ~~~AllisonWonderland~~~~~~AllisonWonderland~~~
Date: Nov 30, 2006 17:52
James C. Allison:
I don't know what kind of information that I need to supply, so I'm going to
just describe the problem, and if more info is needed, I'll supply it when I
know what it is.
I'm running a 1.8 GB Pentium, Tyan Trinity Motherboard, 1.5 GB RAM, and
Windows 2000 Pro OS.
Recently I experienced a UPS failure, the computer just went dead. The
failure also took out the power transformer for the 56K modem. I unplugged
everything from the UPS and went straight into the surge protectors until I
can get another UPS, and replaced the transformer to the modem, and
everything seemed normal.
Right after that, the Mitsubish Diamond Pro 21TX monitor got streaky. It
wasn't plugged into the UPS, and it had done this some years ago, but had
straighten up. It has mitigated some, and is now just slightly streaked. I
updated the driver which didn't solve the problem.
Then a couple of times, upon turning on the computer, the fans came on, but
it did not boot. I held down the "On" switch and it turned off, and then I
pressed the "On" switch again and it booted. It hasn't done this again after
having done it twice.
| 
