PORNOLATION RELEASE

uxidomgxqyxssovekvjqctrliemmdgzwrsiylsdscghdgwfzzrwzyesxiwddoyvkwbbxgibntcdgvhod

This script allows generation of binary firmware files and i2c logs.
Supports three input formats:
-usbmon
-usb snoop
-snoopy pro

Syntax:
NNNNNN: addr AA reg RR = RW
NNNNNN: addr AA reg RR = RV read

NNNNNN is the first line of input source that initiated the
i2c command - this might be little broken at the moment.
AA = address
RR = register
RW = write value
RV = read value

Have fun.

--
Aapo Tahkola

Hi,

the current hg-tree won't compile for kernel 2.6.18.8:

/usr/src/v4l-dvb/v4l/budget-ci.c:110: error: expected identifier before numeric constant
make[3]: *** [/usr/src/v4l-dvb/v4l/budget-ci.o] Error 1
make[2]: *** [_module_/usr/src/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.18.8'
make[1]: *** [default] Fehler 2
make[1]: Leaving directory `/usr/src/v4l-dvb/v4l'
make: *** [all] Fehler 2
very-new-darkstar:/usr/src/DVB #

Hello Luca, hello list,

i found the error: After mounting sysfs, the terratec cinergy t usb xe
will be detect and the firmware will be loaded. In the /dev directory will
some devices /dev/dvb0:* created.

What is to do, that i can scan for senders with scan and to view tv?

If i do ./scan Scanlist >channel.conf i will become an error /dev/dvb/
adapter0 not found.

Thanks for your help.

Dietmar

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

During make I get this:

/usr/local/src/v4ltesti/v4l-dvb/v4l/budget-ci.c:110: error: expected
identifier before numeric constant
make[3]: *** [/usr/local/src/v4ltesti/v4l-dvb/v4l/budget-ci.o] Error 1
make[2]: *** [_module_/usr/local/src/v4ltesti/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.17-50-generic'
make[1]: *** [default] Virhe 2
make[1]: Poistutaan hakemistosta "/usr/local/src/v4ltesti/v4l-dvb/v4l"
make: *** [all] Virhe 2

Did I botch something or is there a glitch in the code?

On Sun, 25 Feb 2007 02:17:54 +0100, "Oliver Endriss"
said:

I have a Twinhan VP-1025 PCI card (BTTV). It tunes fine and records
ok except that every few minutes the recording has glitches which
disrupt the audio and video at irregular intervals. The Twinhan card
works fine using Twinhan's windows software and the same feed as when
used from Linux, so it seems to be a pure Linux issue. The drivers
load and detect the card without any errors.

I've tried running the latest drivers (extracted using Mercuurial and
rebuilt and re-tested just before sending this message) with kernel
2.6.20, but the problem still happens.

Can anyone help?

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hi i've been trying to get my freecom usb dvb stick working with debian etch
(upto date, 2.6 kernel):

I've followed the instructions from

http://linuxtv.org/wiki/index.php/HOW_TO_Installing_DVB

and only deviated when i couldn't connect with

http://thadathil.net:8000/dvb/fw/

is this server down, or just refusing me for some reason?

anyway i found a redhat rpm somewhere with the firmware and my cksum is:

freak:/lib/firmware# cksum dvb-usb-wt220u-fc03.fw
592751328 12902 dvb-usb-wt220u-fc03.fw

The freecom stick has an art.no 28057, which is different to that suggested on
the linuxtv's website of 25451 for revision 3.

But anyway on usb plug in it says it uses this firmware file, and i get a

dvb-usb: recv bulk message failed: -110

which i assume is not good, can any body help?

cheers James

Feb 25 10:01:20 freak kernel: usb 1-5: new high speed USB device using
ehci_hcd and address 5
Feb 25 10:01:21 freak kernel: usb 1-5: configuration #1 chosen from 1 choice
Feb 25 10:01:21 freak NetworkManager...

Nico Sabbi wrote:

Empfaenger : didi.segbert@arcor.de
Absender : didi.segbert@arcor.de (Dietmar Segbert)
Betreff : Re: [linux-dvb] Terratec Cinergy t USB XE
Datum : Sa 24.02.07, 14:43 (erhalten: 24.02.07, 17:27)
Groesse : 960 Bytes
----------------------------------------------------------------------
hello Luca,

thanks for your answer. I have created the v4l-modules form cvs an add
your patch for the af9005 (. the kernel is 2.6.15. the module will
compile without errors.

If i plug in the terratec cinergy t usb xe dmesg will show the following:

usbcore: registered new driver dvb_usb_af9005
af9005: af9005_rc_decode function not found, disabling remote
usb 4-2: new full speed USB device using uhci_hcd and address 2
dvb-usb: found a 'TerraTec Cinergy T USB XE' in cold state, will try to load a firmware
dvb-usb: did not find the firmware file. (af9005.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
dvb_usb_af9005: probe of 4-2:1.0 failed with error -2

I use slackware 10.2 and so the firmware file af9005.fw is in /lib/
firmware/.