On Tue, 13 May 2008 20:21:55 -0700 (PDT), gautham.vanya@gmail.com wrote: While this is not strictly metal related, I'm sure I will get some good advice here. I need to stick tiny (about 1/8th inch dia) rare earth magnets to plastic film (think laminated paper) and I am looking for a glue to do the job. The result needs to be fairly difficult to break.Tried CA, but I can break ...

... wrote: <gautham.vanya@gmail.com> wrote in message news:28033b9b-ffab-45f8-80a5-570585dc82a3@u6g2000prc.googlegroups.com... While this is not strictly metal related, I'm sure I will get some good advice here. I need to stick tiny (about 1/8th inch dia) rare earth magnets to plastic film (think laminated paper) and I am looking for a glue to do the job. The result ...

...6:13 am, "kfvorw...@gmail.com" <kfvorw...@gmail.com> wrote: On May 13, 5:21 pm, gautham.va...@gmail.com wrote: While this is not strictly metal related, I'm sure I will get some good advice here. I need to stick tiny (about 1/8th inch dia) rare earth magnets to plastic film (think laminated paper) and I am looking for a glue to do the job.  The result needs to be ...

... <tony.dave1@btinternet.com> wrote: Has anyone else had or got Echium Fastuosum candicans' Pride of Madeira' Any advice on planting and looking after in first few months , any advice welcome Thanks in advance They're not frost hardy and they need good drainage and a fair amount of sun. ...

Has anyone else had or got Echium Fastuosum candicans' Pride of Madeira' Any advice on planting and looking after in first few months , any advice welcome Thanks in advance

On May 13, 5:21 pm, gautham.va...@gmail.com wrote: While this is not strictly metal related, I'm sure I will get some good advice here. I need to stick tiny (about 1/8th inch dia) rare earth magnets to plastic film (think laminated paper) and I am looking for a glue to do the job. The result needs to be fairly difficult to break.Tried CA, but I can break the bond with some ...

<gautham.vanya@gmail.com> wrote in message news:28033b9b-ffab-45f8-80a5-570585dc82a3@u6g2000prc.googlegroups.com... While this is not strictly metal related, I'm sure I will get some good advice here. I need to stick tiny (about 1/8th inch dia) rare earth magnets to plastic film (think laminated paper) and I am looking for a glue to do the job. The result needs to be fairly ...

While this is not strictly metal related, I'm sure I will get some good advice here. I need to stick tiny (about 1/8th inch dia) rare earth magnets to plastic film (think laminated paper) and I am looking for a glue to do the job. The result needs to be fairly difficult to break.Tried CA, but I can break the bond with some effort. Same with Araldite (epoxy). Any suggestions? Any tips ...

... to year. On one hand, that means we could tell you what year the bike was if you told us more about the specs. On the other hand, that means we can't give you very good advice about the particulars without knowing which year we're talking about. Does the Felt have the bar-top mounted levers of the 2008? Because that's cool: http://www.feltracing.com/08/product.asp?catid=1504,1515&pid=...

... City & Los Altos, CA USA "SMS" <scharf.ste...@geemail.com> wrote in message news:SxlWj.1942$hJ5.544@nlpi068.nbdc.sbc.com... Mike Jacoubowsky wrote: | That's good advice. The Surly Crosscheck Complete has several very big | advantages over the Treks and the Felt. | | 1. 4130 CroMoly versus aluminum This is an advantage because? You...