... have more suggestions about the CF use: http://www.addonics.com/support/faqs/...I'm developing a system that uses CF drives in IDE mode. The compact flash drives support MultiWord DMA 2, but I cannot get XPe to use DMA with the slave device. ...> that both devices report MultiWord DMA 2 as support. How can I...isn't allowing the slave device to transfer using DMA. Thanks, BK

I'm developing a system that uses CF drives in IDE mode. The compact flash drives support MultiWord DMA 2, but I cannot get XPe to use DMA with the slave device. I've checked the registry settings that are associated ...and can see that both devices report MultiWord DMA 2 as support. How can I figure out...why XPe isn't allowing the slave device to transfer using DMA. Thanks, BK

...and not to any mode which uses DMA. just changing from Auto to ...setup in the ebox association with DMA or FPIO. Setting it USER ...> that it can transfer dtaa using DMA. the way to fix ... to something like "FPIO 4/DMA 2" change it to just be FPIO. This will disable DMA transfer to the drive. I ... system is trying to transfer using DMA and timeing out. The ...

...BIOS setup in the ebox association with DMA or FPIO. Setting it USER did not...Flash card has incorrectly told the BIOS that it can transfer dtaa using DMA. the way to fix this ... set to something like "FPIO 4/DMA 2" change it to just be FPIO. This will disable DMA transfer to the drive. I think ... the system is trying to transfer using DMA and timeing out. The problem ...

... Compact Flash card has incorrectly told the BIOS that it can transfer dtaa using DMA. the way to fix this is to go into your BIOS setup, ... probably set to something like "FPIO 4/DMA 2" change it to just be FPIO. This will disable DMA transfer to the drive. I think that what is happening is that the system is trying to transfer using DMA and timeing out. The problem is ...

...Transcend has also non Multi word dma models ( code ending by -P)...when booting Xpe. I'm currently using a Transcend CF and I'... Transcend CF controller (that supports DMA-2). Is it a general ... (by bios) in autodetect for DMA mode selection and is correctly ... is configured in PIO mode (DMA disabled). Realizing a Xpe image ... XpEmd disk driver not to use DMA (it seems that bios ...

... when booting Xpe. I'm currently using a Transcend CF and I've ... new Transcend CF controller (that supports DMA-2). Is it a general problem for CF cards with DMA support or is a specific new... (by bios) in autodetect for DMA mode selection and is correctly detected... is configured in PIO mode (DMA disabled). Realizing a Xpe image with... XpEmd disk driver not to use DMA (it seems that bios ...

... you're running vmware, you want dma on, no? Otherwise the disk is very slow. Well, the "use DMA for ide drives[yes]: ...defaults to "yes", so by default dma will be on. Currently, when the..." to this question in vmware, dma will still be on regardless. ...for vmware). However, aux/vmware is run from termrc before the "use DMA for ide drives[yes]:... moved around if we want dma to be on or aff ...

well, the only thing I could find using Widows Vista was: Intel(R) 82801HEM/HBM SATA... at all, it just freezes in the DMA question, before I answer anything. My ...>>> Does it freeze whether you choose to use DMA or not? éxito! On Tue, Jun 10, 2008 at 3:51 PM, ...it starts loading and the freezes in the "use dma" question. Any clues? Saludos Hugo...

... error messages at all, it just freezes in the DMA question, before I answer anything. My laptop is ... you read the wiki? Is it supported? Does it freeze whether you choose to use DMA or not? éxito! On Tue, Jun 10, 2008 ...>>> when I choose the install option, it starts loading and the freezes in the "use dma" question. Any clues? Saludos Hugo ...