... 2007 16:23:54 -0500, clutch@lycos.com wrote: BottleBob <bottlbob@earthlink.net> wrote: To All: Is there a difference between Fixture Offsets, Work Offsets, and Work Coordinates Systems? I'm looking for a consensus here, so even if you believe someone else's answer is correct, please add ...

...03 Jan 2007 16:23:54 -0500, clutch@lycos.com wrote: BottleBob <bottlbob@earthlink.net> wrote: To All: Is there a difference between Fixture Offsets, Work Offsets, and Work Coordinates Systems? I'm looking for a consensus here, so even if you believe someone else's answer is correct, please add ...

... To All: Is there a difference between Fixture Offsets, Work Offsets, and Work Coordinates Systems? They are the same, same thing different name, they define ... implied there was a difference between Fixture Offsets and Work Offsets he was wrong, since they BOTH refer to the G54-G59 offsets in the control. BB, True but now Cliff ...

...: To All: Is there a difference between Fixture Offsets, Work Offsets, and Work Coordinates Systems? They are the same, same thing different name, they define ...Cliff implied there was a difference between Fixture Offsets and Work Offsets he was wrong, since they BOTH refer to the G54-G59 offsets in the control. BOB! Your supposed to hold ...

... a difference between Fixture Offsets, Work Offsets, and Work Coordinates Systems? Yes and...control manual. And you'll find "work shift" in a lathe ("T") ... changed, shifted, etc. by using coordinate setting G-codes (G92) or ... is different from the absolute, machine coordinate system. G54 use preset ... the G54-G59 (sometimes more), offset settings in the control and ...

... a difference between Fixture Offsets, Work Offsets, and Work Coordinates Systems? I'm ...refer to the same thing. The work coordinate system is something different entirely... manual. And you'll find "work shift" in a lathe ("T") ...be changed, shifted, etc. by using coordinate setting G-codes (G92) or ..., there may also be "dynamic fixture offsets". -- Dan CNC Videos - <http://...

To All: Is there a difference between Fixture Offsets, Work Offsets, and Work Coordinates Systems? I'm looking for a consensus here, so even if you believe someone else's answer is correct, please add your own comments. Thank you. Comments:

... the difference is between work offsets and fixture offsets by, I believe, at... said OneCNC doesn't support multiple offsets, someone ELSE mentioned that you could ... for the lack of a multiple offset feature in the OneCNC. THAT was ... are you anyway? You've not worked for more than a decade, ... to stop posting altogether? Perhaps another survey is in order. LOL That's...

... was a difference between fixture offsets and work offsets when you recently stated ...d not know a fixture offset from a work offset..." You've been asked what you think the difference is between work offsets and fixture offsets by, I believe, ..., as regards to named work/fixture offsets, on his ONEcnc mill module...feature of inputting multiple named fixture/work offsets, but it seems ONEcnc does...

... still think that would be a coordinate system shift FROM the set fixture offset (work coordinate system), to a LOCAL ... the book" is as follows; G92 - Coordinate system setting G51 - Scaling G52 -...System Setting G54 through G59 - Workpiece Coordinate System (#1-#6) Selection, which are...elsewhere in the manual. G68.1 - Coordinate System Rotation G68.2 - Feature Coordinate...