... at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 1664583 sectors (852 MB) w/64KiB Cache, CHS=1651/16/63 hda: cache flushes not supported hda: hda1 hdb: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724.<7>ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix ...

... your problems... I suggest getting the latest CD, to start with. Then, under Linux, do this (if your Plan 9 partition is /dev/hda1): "dd if=/dev/zero of=/dev/hda1 bs=1024" to be on the safe side. I've noticed that if you don't zero the disk, even if you reinstall and have the installer format ...

... your problems... I suggest getting the latest CD, to start with. Then, under Linux, do this (if your Plan 9 partition is /dev/hda1): "dd if=/dev/zero of=/dev/hda1 bs=1024" to be on the safe side. I've noticed that if you don't zero the disk, even if you reinstall and have the installer format fossil etc...

...Built 1 zonelists. Total pages: 129462 Kernel command line: root=/dev/hda1 ro PID hash table entries: 4096 (order: 12, 32768 bytes...CHS=16383/255/63, UDMA(66) hda: cache flushes supported hda: hda1 hda2 hda3 hdb: ATAPI 48X CD-ROM drive, 120kB Cache Uniform ... device: (0000:00:08.0), cmd 3 EXT3 FS on hda1, internal journal Probing IDE interface ide1... kjournald starting. Commit interval 5...

... install on my hard drive. I have a bunch of questions, though. 1. I want to keep Gentoo on here. I already have an extra partition (that I had _something_ on, but I can wipe it). It looks like: hda1: 100mb, gentoo's /boot, has grub info, ext2 hda2: 1gb, linux swap hda3: 123gb, gentoo's /, ext3 hda4: 30gb, can be deleted (put plan9 here ;) ) Firstly, from what I've seen in the docs, ...

... (boriswald@web.de) <tripdog>: mdadm --create --verbose /dev/md0 --chunk=32 --level=5 --raid- devices=4 /dev/hda1 /dev/hdb1 /dev/hdc1 /dev/hdd1 gibt es eine möglichkeit an die daten zu recovern? Nimmsu "dd if=/dev/zero of=/dev/hda1 bs=1M" und läßt das danach auch noch für hdb1 bis hdd1 durchlaufen. "dd" ist der sogenannte "Data ...

...255 Köpfe, 63 Sektoren/Spuren, 5005 Zylinder Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes Gerät boot. Anfang Ende Blöcke Id System /dev/hda1 1 262 2104483+ 82 Linux Swap / Solaris /dev/hda2 * 263 4570 34604010 5 Erweiterte /dev/hda3 4571 4962 3148740 0 Leer /dev/hda4 4963...

boriswald@web.de wrote: mdadm --create --verbose /dev/md0 --chunk=32 --level=5 --raid- devices=4 /dev/hda1 /dev/hdb1 /dev/hdc1 /dev/hdd1 wenn ich /dev/md0 mounten will sagt er mir das kein filesystem zu erkennen ist. Geil. Hoffentlich waren die Daten überlebenswichtig(tm) für den Chef. -Thorsten-

... to boot at least into linux). That went fine. Reboot. Ok, grub works and I can boot without troubles to my linux sytem. Now I turn back primary 1 partition into swap. (using $>mkswap /dev/hda1) Now I want to check, wheather I am able to boot into plan9 using usb-cdrom. So I put cd into usb-cdrom and reboot. The system boots into plan9 without any questioning. Cool. At ...

...modules are different. Boots 2.6.20. Ubuntu allowed us to partition the disk and label as below /dev/hda1 512M /boot boot /dev/hda2 19GB / root /dev/hda3 512M swap It died at about 85%% installed :(...As far as I can tell, we have a valid Debian system on /dev/hda2 with /boot on /dev/hda1 - but no means of divining the SILO magic needed to get them to boot. SILO boots, kernel loads ...