"Sacha" <sacha@nowhere.myzen.co.uk> wrote in message news:C4EECE01.7E5A2%%sacha@nowhere.myzen.co.uk... On 11/9/08 12:05, in article gaau21$nvk$1@inews.gazeta.pl, "shazzbat" <shazzbat@spamlessness.fsnet.co.uk> wrote: "Dave Liquorice" <allsortsnotthisbit@howhill.com> wrote in message news:nyyfbegfubjuvyypbz.k714xq1.pminews@srv1.howhill.net... On Wed, 10 Sep 2008 16:15:04

"Dave Liquorice" <allsortsnotthisbit@howhill.com> wrote in message news:nyyfbegfubjuvyypbz.k714xq1.pminews@srv1.howhill.net... On Wed, 10 Sep 2008 16:15:04 -0700 (PDT), Peter C wrote: I found the nut wanted tightening and when I did so it prevented the clutch drum from revolving. It seems that 'deadley' is spot on and I needto have it welded, a job beyond me. I will have to consider

"Dave Liquorice" <allsortsnotthisbit@howhill.com> wrote in message news:nyyfbegfubjuvyypbz.k714xq1.pminews@srv1.howhill.net... On Wed, 10 Sep 2008 16:15:04 -0700 (PDT), Peter C wrote: I found the nut wanted tightening and when I did so it prevented the clutch drum from revolving. It seems that 'deadley' is spot on and I needto have it welded, a job beyond me. I will have to consider

"Dave Liquorice" <allsortsnotthisbit@howhill.com> wrote in message news:nyyfbegfubjuvyypbz.k714xq1.pminews@srv1.howhill.net... On Wed, 10 Sep 2008 16:15:04 -0700 (PDT), Peter C wrote: I found the nut wanted tightening and when I did so it prevented the clutch drum from revolving. It seems that 'deadley' is spot on and I needto have it welded, a job beyond me. I will have to consider

On 10 Sep, 17:15, deadly <mort.robert.DELETET...@gmail.com> wrote: I have the same problem The flats machined on to the shaft to fit the slotted hole in the sprocket have  completely worn away due to the nut holding the sprocket working loose. So the sprocket just spins - or doesn't when it should. I can't find any spares so I'll repair it myself by rebuilding the shaft with weld