I have a Sun Blade 100. I also need to know which sun frame buffers will allow me to run dial GDM 20D10 on the Sun Blade 100. Dave <foo@coo.com> wrote: Richard B. Gilbert wrote: Howard Huntley wrote: Well, I am back into the sun systems after 3 - 4 years. My Sun blade just arrived that I purchased off Ebay. One of the things that is worrying me is that it arrived without

Richard B. Gilbert wrote: Howard Huntley wrote: Well, I am back into the sun systems after 3 - 4 years. My Sun blade just arrived that I purchased off Ebay. One of the things that is worrying me is that it arrived without the Sun badge on the front and there is no security card to plug into the slot. Where can I get these items? There is not a hard drive in the sys, What size

Well, I am back into the sun systems after 3 - 4 years. My Sun blade just arrived that I purchased off Ebay. One of the things that is worrying me is that it arrived without the Sun badge on the front and there is no security card to plug into the slot. Where can I get these items? There is not a hard drive in the sys, What size or kind of hd should I get? Can I use my old Sun CRTs to run the

> The server is connected as peer. All PCs, plus the server, connect to the same switch then to a router. I've already set up the router to dole out a static IP address for the server. Static IP addresses are not handed out. They are manually typed in. I would not run DHCP on the router and the server. Turn it off on the router. This server is/will also be the DHCP server.

Thanks. There was one question still, posed for the other gentleman about potential conflicts using two NICs (one for DHCP) and the other for DNS when they are both connected to the same switch. Every computer, including the server, is physically a peer (in parallel) and wired to the same dumb switch. The physical layout of the network jacks and the simple fact that the swtich/router