... message news:7823AB0F-DBD6-45C9-853A-B7FCE8B12B44@microsoft.com... I'm a newbie to embedded XP and evaluating XPe for possible use in a future product. I'm stuck on the dreaded 7B stop error (along with the BSOD) during the boot process. I used tap.exe (not ta.exe) to determine my underlying hardware and successfully built an XPe image. I copied this ...

... in message news:7823AB0F-DBD6-45C9-853A-B7FCE8B12B44@microsoft.com... I'm a newbie to embedded XP and evaluating XPe for possible use in a future product. I'm stuck on the dreaded 7B stop error (along with the BSOD) during the boot process. I used tap.exe (not ta.exe) to determine my underlying hardware and successfully built an XPe image. I copied this image ...

...... Hi guys, I normally dont come to the forums for one of these, but this stop 7b has me stumped. Heres whats happening. I have a perfectly good slx file for my target using ...NT Loader. A dependency check shows nothing is missing. The image goes to stop 7b during FBA. What i dont understand is why the image would stop working after removing the EWF. ANy ...

Hi guys, I normally dont come to the forums for one of these, but this stop 7b has me stumped. Heres whats happening. I have a perfectly good slx file for my target using Enhanced ... with the standard NT Loader. A dependency check shows nothing is missing. The image goes to stop 7b during FBA. What i dont understand is why the image would stop working after removing the EWF. ANy ...

I posted a question about stop 7B and USB boot a week ago. I've tried to simplify things to eliminate unknowns. I have been using an...USB HDD and a 150Mbyte FAT32 active partition. After the gray on black progress bar completed, I got a Stop 7B (0XF7C7A528, 0XC0000034, 0X00000000, 0X00000000). The machine BIOS supports specifying the USB drive as the primary boot device. Have I missed...

... to that AHCI SATA port I would fail miserably with a STOP 7B bug-check. Woow Wooow Woooow! So after transfering the image I ... still enabled in the BIOS, turned the power back on and... no 7B and no AHCI. Once FBA is finished I shutdown the computer, ... the AHCI enabled SATA port and power back on, whats this... no 7B... AHCI enabled. Can anyone explain that? I have re-run ...

... to that AHCI SATA port I would fail miserably with a STOP 7B bug-check. Woow Wooow Woooow! So after transfering the image I powered ...still enabled in the BIOS, turned the power back on and... no 7B and no AHCI. Once FBA is finished I shutdown the computer, ... the AHCI enabled SATA port and power back on, whats this... no 7B... AHCI enabled. Can anyone explain that? I have re-run the ...

...and disk hardware". I will try your 2nd suggestion though. Also, I have already tried changing the load order of the disk drivers with no luck. It appears to me that dmboot.sys cannot understand the partition information then reports back to dmio.sys which then falls over with a 7B. Keep the suggestions coming. This is a really frustrating matter. PH

... boot path and disk hardware". I will try your 2nd suggestion though. Also, I have already tried changing the load order of the disk drivers with no luck. It appears to me that dmboot.sys cannot understand the partition information then reports back to dmio.sys which then falls over with a 7B. Keep the suggestions coming. This is a really frustrating matter. PH

... boot disk, check boot path and disk hardware". I will try your 2nd suggestion though. Also, I have already tried changing the load order of the disk drivers with no luck. It appears to me that dmboot.sys cannot understand the partition information then reports back to dmio.sys which then falls over with a 7B. Keep the suggestions coming. This is a really frustrating matter. PH